Did you tick the finishing box.May be there is bugggggggg but bugger me.I just tick the finishing box and it works.Pocket re machine mean finished operation it need finished box checked.MCX2 confuse that why it crashed .

the gap is 0.000005 in X and 0.000002 in Z .chain with 3D won't work cause it go to difference direction .i want c plan mask on.it only a simple 2d contour toolpath.

hi ladies and gents i got few small gap in my chain very small (0.00005mm).What tolerance should their be in Setting-config to get it chain them all in 1 chain . cheers

RPM =(cutting speed x 1000)divide by(3.14159 x cutter diameter) Feed rate = RPM x chipp load per tooth x number of tooth of the cutter Your tool rep should supply you cutting speed and chip load per tooth.

It works thanks you heeeeeeeap John

Hi guys and girls In back plot mode my back plot tool bar is gone or hiding somewhere I still can click on play button to see the tool movement . Any suggestion Thanks cheers

thanks john thanks cadcam

thanks thad thanks sala i got it works for now by hold down shift key and i found auto cursor key as well

sorry guys noluck where can i activate auto cursor setting my right mouse click give me my right mouse button menu

i have same problem pocket remachine regen bomb out.i found the answer here. if u go back to "show topics the last 30 days" go to page 7.The answer is there i m going to try it when i back to work .By the way thanks guys .

Hi everyone Is there a way to select multichains to translate or change colour without going back an click on "lock on chain selection icon" every single time. It alway go back to general seclection after i pick the fisrt chain. Same problem with analyse-between point-lock on intersect(endpoint etc.)icon.After pick the first point i have to click on the icon again to select the second point.MC9 doesn't have this problem. Cheers