roeboat
-
Posts
7 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by roeboat
-
This is the code for AICC. Artificial Intelligence Contour Control Thank you
-
G05.1 Q1 R7 on G05.1 Q0 The Q1 turns it on and Q0 turns it off. R 1-10 depicts how tight to hold the tool to the path.
-
Any idea what section i may want to start with?
-
First off, thanks to everyone on this site! It has helped me get through a lot of issues. I have a new Fadal with a Fanuc Oi-mc controller and I am using the MPmaster post. I am trying to us the AICC function and it works perfect on high speed and surface toolpaths, however when i do a simple counter toolpath it puts in G05.1 for every change in depth on the toolpath. I am guessing its in the post? Any help would be much appreciated. Thanks
-
There is a carrot on the top right of the ops manager. There you will find font and some other fun stuff.
-
quote: In the upper left corner you should see "X2 SP1". Thats how I rembered it in X. I will try to uninstall and load again. Thanks Fellas
-
Im not sure if mine is worked or not. When i ran the .exe file it seemed to install, but when i run a Mastercam session im not sure where to look to see if is installed. It seems like nothing has changed at all.