I have my file up on the FTP site under the MCX2 folder labeled putter. I am trying to create a blended surface to create one complete solid. The wireframe geometry is in level 5 and i need to create all of it into one solid. If you have any ideas e-mail me or reply to this. Thanks [email protected]

I am having trouble trying to solid sweep a blended spline. It is giving me an error. I have uploaded my file onto the FTP site its in the "MCX2_Files" folder and it is labeled "putter" if you can create a solid for the level named "hossel" then please e-mail me with instructions on how you did it without the error showing. Thanks [email protected]

I am having trouble trying to solid sweep a blended spline. It is giving me an error. I have uploaded my file onto the FTP site its in the "MCX2_Files" folder and it is labeled "putter" if you can create a solid for the level named "hossel" then please e-mail me with instructions on how you did it without the error showing. Thanks

I have tried making arcs but i couldnt because i have to create the arcs on a perpendicular arc and the only way i have found to do that properly is to create a Blended Spline. I will take your suggestion into to consideration and try to find an alternate route. Thank you

I am recieving an error "Path curve is not smooth within 5 degrees" When I try to sweep a spline. Does anyone know how i can fix that? Thanks, Jake