We are MasterCAM resellers and if someone is using MasterCAM 5-axis for Brdgeport 1000 XP + Nikken 230 combination, can help us. Please let me know at [email protected] Regards Madhav

Ya..... I have the CD.... but anything which is much simple to understand is what I am looking at

Dear Friends Through web I could locate some training institutes for Post processor training in US but I am operating from India and thus will prefer written teaching aid.... If someone knows any such source who will provide step by step written aid for teaching post processor customization , pls let me know at [email protected] I know a little of customization but yet to learn much .... Regards Madhav Joshi

Dear All A very different type of subprogramming I went across... If someone has a post like this / somewhat simliar to this ..pls let me know at [email protected] Unfortunately MasterCAM Deckel.pst doesnot support SUBPROGRAMMING capabilities in version 9 ...... ============================================== A sample program is as below DEPTH INCREASING PROGRAM (STEP DOWN 1.000) TOTAL DEPTH 10.000 MODE 10 ------- &%27 T1 R 0.000 A 0.000 L A --------------------------------------------- MODE 11 ------- % (&%11/00000000) N1 P1 = =0.000 N2 G00 Z+25.000 N3 G17 T1 N4 F1000 S+1000 N5 G00 Z+10.000 M70 N6 G01 Z =P1 M70 N7 G41 G47 A+5.000 X-50.000 Y-50.000 G0 G60 M61 N8 G01 Y+50.000 N9 G01 X+50.000 N10 G01 Y-50.000 N11 G01 X-50.000 N12 G40 G47 A+5.000 N13 P1= P2 N14 L10 N6 N13 N15 G00 Z+25.000 M30 ? 0000 ------------------------------ MODE 12 -------- P2=(P1-1.000) ------------------------------------------------------------------------------ Regards Madhav Joshi

anyone having post processor for CNC Lathe (Hineumeric controller - STC 20) pls mail me Madhav

send me the post file and I will customize it as per your requirement

How to get the necessary depth of projection on required surface by project toolpath with CURVE-Option or NCI-option