Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
How do you get hybird toolpath to drive past the bottom of the part? my depth is set at -.720. the bottom of my part is -. 620
all other SHS toolpaths will drive past, see the attached the blue is hybird and the yellow is dynamic optirough.
JParis, Please lets us know what find out. ive been bit by this also, the frist time was a $ 40k bite. we linearize when needed and run from the back ground memory, but runnung from the back ground we can only feed at 30 ipm max
Is anyone using Macro programming Particularly for sub-gates or any other that you would like to share and if so could you provide an example Not looking for code just ideas Thanks
That’s exactly what I mean and our EDM dept enters burn locations by hand all the offsets for trodes are uploaded from the CMM Inspections .so sometimes they fat finger the wrong numbers. Thanks for the input
no its looking in x3mu1 folder but if i use the icon it points to the right folder with errors
looks like a config problem damh IT guys should I reinstall it? or do you have a fix ?
I have a new computer dell T3500 running XP 64 bit 1st problem I know . 2nd X5MU1 I’m trying to run a /or any C-Hook and I get the Unknown file type error message . how can I fix this ?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.