hi, I mean automatic filling of gap, missing surfaces, etc (surface stitching) Thanks..

mastercamextranet also canot find this post....

Evertime I post a question to mastercam, there is no response..... Other CAM Software are STRIKING MASTERCAM HARD!!!

u r qualify as a certified programmer if u r using ANY OTHER CAM such as Delcam, UG, powermill, etc. EXCEPT MASTERCAM!! NO SUPPORT FROM MASTERCAM!!

Dear all, Any watertight feature in mastercam just like Delcam Powershape? Thanks..

Dear all, Is there any new 5-axis examples? (ppt and part)just like UG or Delcam? Thanks..

Dear All, Is there anywhere that I can enable the fishtail option in the post processor for PRE-X and also X version wirecut post processor? It will output “R-0” other than the I,J at the fishtail there. Where can I modify so that I can output the I,J or R with some value? Thank you. Machine: Mitsubishi - PA20.

Hi. Everyone, Is there any new chooks or post that i can use for Charmilles Robofil 2050TW? I'm gonna to die....no support from Mastercam!!!

Hi. Everyone, Is there any new chooks or post that i can use for Charmilles Robofil 2050TW?

Hi everyone, Does anyone have idea on how and where to obtain the post for it? Charmilles Robofil 2050 that need 4 files to run the machine...

I can modify the setup sheet so that the tool list is divided into tool number , tool diameter, Pmaxmin, RPM , Feed , etc in column...and also the .NC file directory as well.....it's a selling point to our customer, From [email protected] , Mastercam application engineer (Malaysia)

hi everyone, is there any way that i can modify my post so that I can get "M01" everytime it finishes the pocket? I can only add "M01" in prapid .. . if I put before pncoutput , it will output M01 after clearance height before going to the other pocket..if i put "M01" after pncoutput, the M01 appears after it moves to the other pocket,

There is a way to output XY-Drill position in Prodrill. What about Mastercam itself? Thanks. Where is the file for the "post-processor" for Prodrill? So that I can have something to refer........ How do I force Prodrill to use only the drill I have defined? other than using import operation? So that I only need to select the drill points only once other than using last in import operation?? URGENT!!!!!!!!