Hi at all How can explain me wich pin from 9 to 25 must be conected when i will create rs 232 cable for a fanuc control? Thanks fpr help goodmill

Hi at all Woodwop is a very specialy Format code ! In my devlopment you can use also the universal makro or ply file from woodwop programming software or all woodwop makros like milling sawing and so! We cant compare the woodwop code with a Iso standart code ! Its to different ! The best way to compare the iso code is when you use the universal makro, but than you dont see the ways in woodwop backplot only the startpoint! Wic version from woodwop do you use ? 5 or 6 When i can help you please send me a Email goodmill

Hi Wendy 1. i have empty pages after every page 2. i am printing directly from from active report! When i save as example PDF and then printing its correct ! But i think it must be possible to print direct from Active Report 3. I have use the standart Router setupsheet, and have made no modifications ! Thanks for help goodmill

Hi at all when i generate a setup sheet with active report it looks correct in preview ! When i will print it for all sheets the printer brings another page there is blank or empty ! can i adjust it somwhere that i have no empty pages by printing ? Thanks for answer goodmill

Mackay please visite www.schreinerservice24.de he has a solution for this

Last try Nobody who knows somewhere who knows with extern files with a valberty machine control cnc90 dos based ?

HI riversail i think nobody works with this machine !!! I have post in many other forum but no answer ! the problem is that the machine have a specialy file named indice.prg and this is a converter i think, but it is in binary goodmill

HI John Yes i have a post for this machine, and i try to milling this programm on the machine; but its very specialy to bring this programm on machine while the interface works with a Floppy disk and on this disk it needs specialy registers and a special File named "indice.prg". Do you know the right way to do this ? Thanks Goodmill

I will put a CNC Programm to a Valberty CNC machine, but its very specialy to do ! How can help me to find the right way to copy a Iso File on Valberty Control with CNC 90 ? Thanks