I will try setting offset values in view manager tomorrow see if that helps, of course they are or should already be there with each coorosponding view, thanks for your help if a ballon pops and you say wow be sure to fill me in, there is some things I played with within the control definitions manager editing the control under Control topics Work System..... Thanks Again

The Part was complete and good off machine having programmed it originally in 9, the operator just wanted me to thicken tab membrane a touch for more stability during final passes when I posted it out using ten after said adjustments is when I noticed some p's were missing and others werent? I have completley went to Mastercam X MR2 and have uninstalled 9, unfortunatley I am so anal I don't like editing my nc to many room for errors with me I like to put what I post in machine and let it run.

A Gen Fanuc 4 ax post that came with V9 minor adjustments made and prooven on same machine using V9 that has been run through Mastercam's X converter. The post does fine through 9.

What I have been seeing is when tool initially starts it does fine but later in code if I want to cut with same tool on a different plane it gives me the b but no p value assigned to that plane for that b rotation.??? yet if I post it singly it does?

I will see if setting them up in view manager will create a force issue , thanks good idea...

My WCS is top my t&c planes are my rotations around the sides of cube

The offset numbers were entered that went with each T-plane I was wanting to utilize not through view manager but through thr planes radio button on first page of every too

Okay I have a 12"x 12" x 12" Cube, part is mounted onto a 5in technigrip. I use P-11 On B zero side, right side of cube or "B90" I use P-21 and reduce tab to .025 thick from that side from C/L of rotation, with center symmetrically located about rotation. I use P-41 on left side and reduce tab to .025 thickness for an overall thick tab of .050ths. However even though 21 or 41 or 11 is entered into work offset window, I Am not always getting the output of " G90 G54.1 P-21 OR 41 OR 11 with corosponding B axis on every change in toolplane. All the output is giving is *********** M11B270. M10 ******** when it should be as follows: ****************** G0 G90 G541 P-21 M11B90. M10 **************

Output is not generating G54.1 P21 Ect.. at all index positions, even if it is same tool using a new toolplane the only output is the B positioning even though an assinged value is entered in the work offsets box under planes button on initial parameters page, any ideas??? Leblonde Makino A-55 Horizontal 4 Axis. I have tried several changes within the machine definition control defenition under offsets to no avail.