-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by JNMFD
-
-
It looks like it's not going back to the G17 plane. Try adding a G17 before the line that alarms and see if that helps....John
- 1
-
Your welcome.
John
-
Uncheck the "Repaint toolpaths" box on the "toolpaths" page in configuration.
-
In Mastercam Menu select, Settings-ram saver
-
Try the "Insert" key on your keyboard.
-
Do you have a sweep angle? Mine won't work without one.
-
I believe that if you use "control" as Tony said, and use Zero in your offset on the machine, it will give you the results that you want. I may not look right in the backplot (because MC will simulate the comp), but it should work. HTH
Drafting Fonts
in Industrial Forum
Posted
Instead of using cross hatch in the above method, You can also use Create--Surface--Flat Boundary with the window chain and it will fill in the text...John