JNMFD
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by JNMFD
-
Instead of using cross hatch in the above method, You can also use Create--Surface--Flat Boundary with the window chain and it will fill in the text...John
-
It looks like it's not going back to the G17 plane. Try adding a G17 before the line that alarms and see if that helps....John
-
Your welcome. John
-
Uncheck the "Repaint toolpaths" box on the "toolpaths" page in configuration.
-
In Mastercam Menu select, Settings-ram saver
-
Try the "Insert" key on your keyboard.
-
Do you have a sweep angle? Mine won't work without one.
-
contour type tool path at center of tool, not edge?
JNMFD replied to RDEnright's topic in Industrial Forum
I believe that if you use "control" as Tony said, and use Zero in your offset on the machine, it will give you the results that you want. I may not look right in the backplot (because MC will simulate the comp), but it should work. HTH
