oh yeah--the part is Aluminum and is approximately 13 x 6 x 1.5-- there are 2 of them--a right and left.

Well, thanks all for the comments here-- but here is the situation--I work for a machine too distributor--We sell Makino, Hermele, YCM, Ixion, Toshiba, SNK, etc. We WERE going to cut it in our research facility here in Auburn Hills, but unfortunatley the machines we were going to use have been sold and it seems as quick as they come in they go back out. I HAVE contacted a lot of people around here locally--but everyone is so darned busy.- I usually do all of these projects myself here in the shop--Due to circumstances I am not able to do that with this project so I figured I would extend the courtesy to other people out there who would like to be involved in this project. Nothing more-nothing less. If you are interested--get back with me--if not--then thats ok too. Just thought this would be a good place to go. Thanks to all that have replied so far.

Why shouldnt I contact people here to try and get this project done--cant I trust people here?????

I have a part that is programmed already in MC9 but just need it cut--it is a multi axis part, but could be done on a 3 axis machine, just soem addl setups needed. any interested parties contact me and I will send the files over. If this one comes out there are 2 more to do --just a bit different. Whomever cuts this will be featured in a magazine article featuring the finished part on the projedct that it is being done for. my email is [email protected] NEED this quick!!!! thanks