Thanks, but I already had CAST and dollar for dollar Mcam beats UG hands down.

Anyone out there know of anyone looking for a Mastercam programmer in my area. Company shutdown

Mastercam and brought in two seats of UG with veteran UG programmers. I'm lookin.

Thanks

[email protected]

Keith

Goto http://www.fpsols.com/stl_import_sw.html

My Mastercam Dealer programs haas 5 axis to machine cylinder heads for those bad boys at NASCAR. I don't know the race team.

NASCAR and MasterCam ROCKS man !!!!!!!!!!!!!!!

Great Forum

Hi Guys,

I save a STL in Verify and bring it back in on a level to print out setup sheets, but it isn't shaded. So I load the file in solidworks through a STL import plug-in that converts it to a solid part. Then I save that as a parasolid and read it back in mastercam. The problem is that the file gets to big. Is there a beter way around this? Verify shows a shaded stl when you verify and if you use highfeed and select STL filename, Draw STL it is also shaded. When I use vericut it also shades the STL file.

Thanks in Advance

Dan

Crash and Burn

Live and Learn

For those of you needing to make cool and very detailed setup sheets for the shop floor, such as clamp changes and fixturing locations. I use my stl files that I made in Master Cam Verify.

And import them into solid works with add-in, works great.

http://www.fpsols.com/stl_import_sw.html

Let me know what you think.

Dan Welch

[email protected]

Crash and burn

Live and learn

ELAD

I HAD THE SAME PROBLEM WITH FLOWLINE. HERE IS THE FIX. Load Appmch9-060302.exe and Crash. IF YOU DOWNLOADED THIS FROM MASTERCAM SITE.GOTO SEARCH AND TYPE IN "MC9 CRASH" AND READ THE THREAD ON FLOWLINE. I JUST FOUND THIS ON THE FORUM AND WILL DO WHAT IS ADVISED THIS MORNING WHEN I GET TO WORK.

GOOD LUCK

DAN WELCH

CRASH AND BURN

LIVE AND LEARN