Mr. M
-
Posts
658 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Mr. M
-
Thank you sir!
-
Picture didn't show here it is
-
I am seting up one of these tools, and I am curios how you program for it. Do I program the same as for a vertical tool and modify the code to put it at a 45? -EDIT- I am working on a mill/turn
-
Groove works for me here.
-
Once more
-
Am I the only one with this issue??
-
bump
-
I am having problems with the Axis combo selection working for my mill/turn. I select Right upper for both the tool and toolpath, and it will usually post out incorrect unless I re-click on the Axis combo again (which dirtys the op even though it was already selected) and regen. Anyone else having this happen?
-
Right click in the ops Manager, select Import, and find the file you want, select the ops, and Green Check. Done
-
Didn't migrate when I installed
-
I haven't uninstalled any versions on my computer. I still have X3 loaded.
-
It crashes, but the updated files are there
-
Has anyone had any issues updating there machine control and def. files?? Mine is crashing every time when I try to update!
-
I think I got it! in the rotation type changed to Y-axis from no rotation!!
-
quote: that you udated your planes in Parameters? In the toolpath parameters? Yes. Wcs=Top/Tool plane & comp plane=New plane I use planes on all my parts without issue, but not on the face.
-
I just tried it in the Right plane and main spindle. I cannot get it to post any different there either. I put a file on the ftp in the X4 files called C_axis_test.
-
I had them as that and tried the new rotated plane as well. Same g-code
-
I am working on a mill/turn and on my sub-spindle I have some holes to mill on the face (left view). I want to position the C-axis at a different position than the left plane does. ( the geo is on the lower end of the part and I do not have enough travel) I tried "rotate planes" and rotated the Left plane 180 around Z, but the posted code is the same Any help? Thanks
-
Take a look at the Benchmark topic Here
-
Nope, not that I know of, also if you copy and paste an op it will go back to left
-
Thats just it, it was copied geometry that was not used in anything! It was a copy of geo tied to planes, none of which are used for lathe
-
I have an X4 file with many lathe and mill toolpaths, when I copied a level (with geometry for creating planes) and rotated the geometry all the lathe ops needed to regen. Whats up with that?? Edit When I regenerated the file (using Regenerate all Dirty ops) all the High Speed mill toolpaths that didn't have the red X also regenerated [ 07-06-2009, 09:33 AM: Message edited by: Mr. M ]
-
Anyone?
-
Bump
-
quote: Topic: X4 Merged NCI
