How do you change the default 500 max feed. If I enter anything different it will put 500 back in. Thank You

jparis, I do know the differance and they are not 2016 files. Anyway, I did find a thread that had me go into the following... right click on CMD.exe and run as administrator then run the following in CMD C:\windows|syswow64\regsrv32.exe "C:\program files\mcamx9\common\swoksdata\swdocumentmgr.dll" Worked great. Thank for all the responces. This process should be pinned. I agree

I don't have solidworks on this computer. I did just do some windows updates yesterday.

I am having trouble opening any solidworks files. It just started yesterday. Any ideas. It works fine on other computers. Thank You

Thanks for all the input. I just checked my op defaults and I have coolant turned on for all the ops (everything) but it still sets each op for my part to coolant off. I just forget to turn it on here and there and my guys can't seem to fix it at he machine. Very frustrating.

I am having trouble getting the coolant to be on all the time by default. When I am done with my tool paths I have to go into the common parameters and turn the coolant on for all operations. What can I do to get it to always have coolant on with the machines I use? Thank You

I am using a standard 2d pocket and plunge into a hole. What it does is after the first depth it rapids to z.1 and then calls a G1 x..y..z.. instead of Z.1, x... y..., g1 z-.. even is I have it ramp zig zag, it still gives me a G1 x..y..z.. move to the start of the next depth. auggggg. Only since X6

I have it set to no entry and select a entry point on a corner.

When I post out a pocket program with depths in it I get x,y,z moves all in the same line for the next depth. All my settings are set to break xy moves first and then z. This has only happen since I started with X6. Is there a setting I am missing?

Does not display dog legs moves. It show straight point to point. I want dog leg moves to show. Thank You

Is there a setting that will allow mastercam to show my rapid moves to where it satisfies the 45deg move first instead of point to point rapids?

yes you can, go into the Alt+f8 (config settings) and goto the toolpaths topic. In the lower left corner there is a "set-up sheet program". set it to GUI. This will get the set-up sheet like v9. Jamie