Thanks Colin, it worked perfectly. 

      pcan
      #pbld,  *sgcode, *sgabsinc, sg80, e$ #ADDED
      pbld,  sg43, *tlngno$, pfxout, pfyout, pfzout,  [if nextdc$ <> 7, *speed, *spindle], e$ # G43 with spindle start
      if mi4$,
       [
       no_spc$, "G91 Z#612 (BLADE THICKNESS ADJUST)", no_spc$, e$
       pbld, "G90", e$
       ]

GETS ME THIS:

G0 G90 X.1035 Y4.8144
G43 H99 Z.15 S9000 M3
G91 Z#612 (BLADE THICKNESS ADJUST)
G90
Z.057
G1 Z.047 F50.
G41 D99 X.0156 Y4.8621 F27.

THIS IS WHAT I NEED:

G0 G90 X.1035 Y4.8144
G43 H99 Z.15 S9000 M3
Z.057
G1 Z.047 F50.
G91 Z#612 (BLADE THICKNESS ADJUST)
G90
G41 D99 X.0156 Y4.8621 F27.
 

I cannot find a .xml in Active reports that I need to publish “N” on operation/ s selected. Is this possible?

Can anyone tell me how to force the spindle RPM, G43 H?? on every sub call. see edited code below.

G0 G17 G20 G40 G49 G80 G90

G91 G28 Z0.

(LINER POCKET P1-P6)

N1 T4 M6 (1/4" 4FL DOWN CUT EM)

(MAX - Z.5)

(MIN - Z.132)

G0 G90 G154 P1

X4.3152 Y.2738 S9900 M3

G43 H4 Z.2875

M97 P1941

/G0 G90 G154 P2 X4.3152 Y1.6238 S9900 M3

G43 H4 Z.2875

/M97 P1941

/G0 G90 G154 P3 X4.3152 Y2.9738 S9900 M3

G43 H4 Z.2875

/M97 P1941

/G0 G90 G154 P4 X4.3152 Y4.3238 S9900 M3

G43 H4 Z.2875

/M97 P1941

/G0 G90 G154 P5 X4.3152 Y5.6738 S9900 M3

G43 H4 Z.2875

/M97 P1941

/G0 G90 G154 P6 X4.3152 Y7.0238 S9900 M3

G43 H4 Z.2875

/M97 P1941

M5

G91 G28 Z0.

G28 Y0.

I did get this to work by imputing  //NCFILE/NCFILE-LONG INTO THE DataField. The only issue is the operations list repeat in a loop 3 or more times. I tried moving the location within the  setup sheet to no avail. 

I'm trying to add the NC file path to the active reports setup sheet.  I've tried 

If indeed this is an enhancement some kind of alarm would be nice.

It ended up being the Min toolpath radius  under Gap size in Cup parameters being too big went from 7.5% to 6.5%. Seems like a bug to me.

Just recently dynamic 2D milling will not regenerate. I sent a zip to go to my local re seller and it worked for them. I would say this is localized to my PC but 3 of us with different PC's had the same results. preview chain looks good, event log says  "completed multi-threaded regeneration of selected operations"  but still shows dirty. did a complete uninstall an reinstall still no go. anyone seen this?  My system is a Dell ,i7-4710MQ, 16 gig ram, Quatro K2100M video card with newest Nvida driver. 

I would like to add posted code file path  to my active reports set up sheet. This tag is not listed as far as I can see in the documentation. Is there any way to extract this?

I'm getting an "Parasolid ® Kernel Interface Error: Ki Error Code:22 tag is invalad or dead" when tring to save in X9. I have looked at the Solids manager and none show as dirty. Any ideas?