Doug Nemeth CNC Software Sales
-
Posts
201 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Doug Nemeth CNC Software Sales
-
-
You might also want to make sure that the insert is a different color than the holder. The system default is RED for the insert and GREEN for the holder.
------------------
Doug Nemeth
CNC Software, Inc.
Sales
Swarf vertical wall
in Industrial Forum
Posted
If it is a 3-axis machine, I'd try using m-surf surface finish contour. If it a 5-axis application, the new Swarf 5Ax toolpath works very well. You can drive the tool using the surfaces, or rails (edge curves).
Steep m-surf might not give you the desired results, as the tool would cut the short way on the surfaces.
------------------
Doug Nemeth
CNC Software, Inc.
Sales