cool
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by cool
-
-
Hi,
did you set the Haas setting to fine or G187 P3 E0.005 ?
Christian
-
Hi,
2d dynamic mill? Pick in geometry entry chain- select point- center of your hole- helix entry radius 0.
Christian
-
Ask your tool suppliers, they will not promise you anything on the hydraulic clamping force. on the end they will say the best is shrink fit.
Christian
-
Anyone, after all my work uninstalling and installing X9 it lasted for a week. Now i'm back to messed up colors in verify compare.
Christian
-
Hi Guys,
solution I found was: uninstall X9 clean all strings out of the registry I could find and install again. So far so good.
Thanks for your help
-
Thanks 5th.
I did contact my reseller and they working on it, just hoped for a quick fix.
Christian
-
I did play around with all the quality options in verify. I did re-install X9 and the bug fix, never had problems in X8.
Thanks
Dell Precision T3610
Xeon 3.7GHz
8Core
RAM32NIVIDIA Q K4000
-
bump- anyone??
-
-
-
Hi,
settings-control definition- operation defaults. Or toolpath window left top corner save icon will save your toolpath settings to the defaults.
-
Yes you can, just drop your tool library on the server go to machine definition manager- general machine parameters-tool/material library. tab and browse for you library on the server.
Christian
-
I'm sitting ½ day with mastercam other ½ in the shop. I went cheap and bought a space navigator. Was used to the space explorer with unigraphics, but the space navigator is just fine if you don't work the whole day with it.I use the 2 buttons for lock rotations and enter key.
Christian
Waterline toolpath
in Industrial Forum
Posted
Hi,
how old is your HAAS? Does your HAAS has a USB port on the control? You can feed your program from the USB stick. Is your machine setting in the control at fine corner rounding 0.005?