Hi,

how old is your HAAS? Does your HAAS has a USB port on the control? You can feed your program from the USB stick. Is your machine setting in the control at fine corner rounding 0.005?

Hi,

did you set the Haas setting to fine or G187 P3 E0.005   ?

Christian

Hi,

2d dynamic mill? Pick in geometry entry chain- select point- center of your hole- helix entry radius 0.

Christian

Ask your tool suppliers, they will not promise you anything on the hydraulic clamping force. on the end they will say the best is shrink fit. 

Christian

Anyone, after all my work uninstalling and installing X9 it lasted for a week. Now i'm back to messed up colors in verify compare.

Christian

Hi Guys,

solution I found was: uninstall X9 clean all strings out of the registry I could find and install again. So far so good.

Thanks for your help

Thanks 5th.

I did contact my reseller and they working on it, just hoped for a quick fix.

Christian

I did play around with all the quality options in verify. I did re-install X9 and the bug fix, never had problems in X8.

Thanks

NIVIDIA Q K4000

bump- anyone??

Hi,

anyone had this happened in X9 all my colors are off then I compare my file. picture attached.

Thank you

Christian

helical

Hi,

settings-control definition- operation defaults. Or toolpath window left top corner save icon will save your toolpath settings to the defaults. 

Yes you can, just drop your tool library on the server go to machine definition  manager- general machine parameters-tool/material library. tab and browse for you library on the server.

Christian

I'm sitting ½ day with mastercam other ½ in the shop. I went cheap and bought a space navigator. Was used to the space explorer with unigraphics, but the space navigator is just fine if you don't work the whole day with it.I use the 2 buttons for lock rotations and enter key.

Christian