I noticed in X3 That I have to do a ton of Ram Savers compared to the previous versions of MCAM. Not sure why. But Everything else seems to be preforming up to Par

Yeah it was the Temp. 30 Day key. But I thought I updated it already. But I got the new code and updated with no problems. Hooray M CAM!

Yeah I have Version 9.1 X and X2 so Im not a new member. But I think for some reason the update code they provided me just didnt update. So I'm going to contact my local Master Cam provider thanks though.

It says my Hasp has expired. But I have the X3 installed as of like 2 weeks ago and all the software in front of me. Not sure why this happened?

Jack Pot! Worked Thanks alot

I use this feature often but have never used it to rotate operations. I have 3 parts on a sheet and use the normal transform to do 2 of them. Is there a easy way to Flip the part 180 and transform it over to a point? I don't want to re-select all my geometry ..I have tried playing with the function but the part never seems to land in the correct spot.

Totally got it. I had to just go find a picture and make sure it was saved as one of the supported Ras functions. Then it totally worked as needed. I looked at that wintopo thing too. Thats very Helpful as well thanks everyone. CHEERS!

Whats the FTP...Im new to the Forum..*Everyone Points and Laugh* I mean I see the FTP page and all the documents in it. How to I load a document?

The problem is thats its a Word Doc. And theres no way to bring that into Master Cam. I tried the C- Hook function and the drawing isnt in one of the "Supported" Formats...

I'm in charge of engraving a X-Mas stocking on to a part for the Holidays. I have a nice simple stocking I found online, but I forget how to bring the stocking into Master Cam to tool path it? Any help would be sweet! Oh yeah I'm using X3 and tried the file/Pattern Merge function..but ...