please disregard my original post. I found it shortly after posting. Thanks.

we have a G&L control that insists on 4 decimal place accuracy for arcs and arc centers, but my output always comes out to 3 decimal places. Where would I find this setting? Thank you.

Using X2 Level2: i am attempting to modify a post written for a Fanuc control to one suited for a G&L control. i have everything figured out but one: On circular moves, G&L requires (assuming XY plane selection) X,Y,I and J positions even if those positions are the same as the previous X,Y,I and J positions. The "fanuc style" output is to not output those positions that are the same as the previous position. Is that clear as mud? I cannot find anywhere in the post that "asks" if i want to "force" this output. Can anyone help? Thank you.

Excellent. Thank you both.

using X2, Level 2: Say i have created a contour toolpath that is fairly complex. When i am done, i discover that i did this using "TOP" wcs, and i meant to do it using a wcs that i had defined called "OP1". How do i change the toolpath i created to use the OP1 wcs without having to start over? (if for any reason this is not the plce to post, please point me to the correct forum)