Feed rate from finish path is only going to be posted in rugh can cycle when you post finish (G70) after rough ,and you miss it if finish path a couple of tools ( processes ) below.

quote: "OMIT" does it as well. "OMIT" or "NCYL" ...... Is there a way to post this with any drill cycle with Subprogams only.

Sorry. if feed >= 0.008

ldrill$ #Canned G81 drill cycle, lathe pdrlcommonb if feed >= 0.008, feed = 0.008, else, feed = feed pcan1, pbld, n$, *sg80_f, "G99", prdrlout, pfzout, pffr, strcantext, e$ if initht$ > refht$, pbld, n$, sg00, "Z.1", e$ pcom_movea

Hi, I am trying to defining reference positions Approach & Retract from mpmaster_vertical.mmd Machine axis combinations dialog box Reference Points . I Select the Z check box to activate each axis for Approach & Retract. And Absolute ( Z3.75 for example ) to set the reference point relative to the origin. But i don’t see it in NC file , the post is mpmaster.pst and mpmaster.control . Is there something else i need to do or the post isnt support this option . Does anyone else use this type of reference points , and still using home position ? If yes please advice. Thanks in advance.

I see you have Mill 1 to. dos id work in your mill post?

it didn't worked.

i was hoping to do it without any extra mouse clicks.. thinking if it read call for sub or anything whatever forcing post sub it will do it automatically .may be something like that or what is the parameter to call sub pcan1, pbld,[if psub_call_s$ = 1 ,"NCYL",ELSE,], n$, *sgdrlref,.....

Hello. Does anybody run a "NCYL" in OKUMA drill cycle? is there a way to POST this with any drill cycle using Subprogams only? ************************************************** G17 G40 G80 G90 G94 G15 H15 G00 Z20 IF [VATOL EQ 2 ] N2 T2 M06 M01 N2 (.250 DIA ) G00 X-3.0 Y0.0 M3 S1000 G56 H2 Z3.0 M08 T3 G95 G71 Z2.0 G00 Z.11 NCYL G81 Z-.2 R.11 F.0033 M53 ( Sub ) CALL OS1 G80 G00 Z2.0 G94 M09 Z20 M01 M06 Y20 Z20 X-12 M30 OS1 X-1.5 X0.0 X1.5 X3.0 RTS ************************************************** G17 G40 G80 G90 G94 G15 H15 G00 Z20 IF [VATOL EQ 2 ] N2 T2 M06 M01 N2 (.250 DIA ) G00 X-3.0 Y0.0 M3 S1000 G56 H2 Z3.0 M08 T2 G95 G71 Z2.0 G00 Z.11 G81 Z-.2 R.11 F.0033 M53 (No Sub ) X-1.5 X0.0 X1.5 X3.0 G80 G00 Z2.0 G94 M09 Z20 M01 M06 Y20 Z20 X-12 M30 ************************************************** Mastercam Mill Post : Mpmaster for Mastercam X3 pdrill$ # G81 Canned Drill Cycle pdrlcommonb pcan1, pbld,?????(NCYL), n$, *sgdrlref, *sgdrill, pdrlxy, pfzout, pcout, pindexdrl, prdrlout, *dwell$, *feed, strcantext, e$ pcom_movea Thank you for any suggestions.

I also see there is NCYL heading is there a way to POST this with any drill cycle using Subprogams only. ************************************************** G17 G40 G80 G90 G94 G15 H15 G00 Z20 IF [VATOL EQ 2 ] N2 T2 M06 M01 N2 (.250 DIA ) G00 X-3.0 Y0.0 M3 S1000 G56 H2 Z3.0 M08 T2 G95 G71 Z2.0 G00 Z.11 N2 (.250 DIA ) G00 X-3.0 Y0.0 M3 S1000 G56 H2 Z3.0 M08 T3 G95 G71 Z2.0 G00 Z.11 NCYL G81 Z-.2 R.11 F.0033 M53 ( Sub ) CALL OS1 G80 G00 Z2.0 G94 M09 Z20 M01 M06 Y20 Z20 X-12 M30 OS1 X-1.5 X0.0 X1.5 X3.0 RTS ************************************************** G17 G40 G80 G90 G94 G15 H15 G00 Z20 IF [VATOL EQ 2 ] N2 T2 M06 M01 N2 (.250 DIA ) G00 X-3.0 Y0.0 M3 S1000 G56 H2 Z3.0 M08 T2 G95 G71 Z2.0 G00 Z.11 G81 Z-.2 R.11 F.0033 M53 (No Sub ) X-1.5 X0.0 X1.5 X3.0 G80 G00 Z2.0 G94 M09 Z20 M01 M06 Y20 Z20 X-12 M30 ************************************************** pdrill$ # G81 Canned Drill Cycle pdrlcommonb pcan1, pbld,?????(NCYL), n$, *sgdrlref, *sgdrill, pdrlxy, pfzout, pcout, pindexdrl, prdrlout, *dwell$, *feed, strcantext, e$ pcom_movea Thank you for any suggestions.