-
Posts
168 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by thanhsonnguyen
-
-
ipr that feed takes more longer, i'm ready know how too changer it thanks for you guy help ..., if someone still , try in !feed ..(tap) remove ! ,it shuold be fire
-
i'm try delte it and it come ok, but don't know have anything later prolem in part not?
if mi6$ = 1 | ((opcode$ = 3 | opcode$ = 16) & drillcyc$ = 3 & use_pitch),
- but it come out g94 same drill how to delte g94
-
and feed rate come out 9FPT0 F.0179.. nay one help pls
-
ANYONE HELP WITH DID PROLEM g94 and g95 HOW TO TURN OFF POST USING HAAS
N100 G00 G17 G20 G40 G80 G90
N110 T5 M06 ( #49 DRILL)
N120 (MAX - Z2.)
N130 (MIN - Z-.971)
N140 G00 G17 G90 G54 X.601 Y-.194 S5000 M03
N150 G43 H5 Z2. M08 T6
N160 G94
N170 G98 G83 Z-.971 R-.641 Q.03 F10.
N180 Y-1.006
N190 G80 M09
N200 M05
N210 G91 G28 Z0.
N220 M01
N230 T6 M06 ( #2-56 TAPRH)
N240 (MAX - Z2.)
N250 (MIN - Z-.22)
N260 G00 G17 G90 G54 X1.0805 Y-.412 S100 M03
N270 G43 H6 Z2. M08 T5
N280 G95
N290 G98 G84 Z-.22 R.1 F.0179
N300 Y-.788
N310 G80 M09
N320 M05
N330 G91 G28 Z0.
N340 G28 Y0.
N350 M30
-
ANYONE HELP WITH DID PROLEM HOW TO TURN OFF POST USING HAAS
N100 G00 G17 G20 G40 G80 G90
N110 T5 M06 ( #49 DRILL)
N120 (MAX - Z2.)
N130 (MIN - Z-.971)
N140 G00 G17 G90 G54 X.601 Y-.194 S5000 M03
N150 G43 H5 Z2. M08 T6
N160 G94
N170 G98 G83 Z-.971 R-.641 Q.03 F10.
N180 Y-1.006
N190 G80 M09
N200 M05
N210 G91 G28 Z0.
N220 M01
N230 T6 M06 ( #2-56 TAPRH)
N240 (MAX - Z2.)
N250 (MIN - Z-.22)
N260 G00 G17 G90 G54 X1.0805 Y-.412 S100 M03
N270 G43 H6 Z2. M08 T5
N280 G95
N290 G98 G84 Z-.22 R.1 F.0179
N300 Y-.788
N310 G80 M09
N320 M05
N330 G91 G28 Z0.
N340 G28 Y0.
N350 M30
-
ok, i'm try that wcs top set same plane my totpart, if come ok now thanks for help that, but if work fire in x3...., so i'm need to change all my old file????? if use x4
-
i'm ready try set wcs toolpart on top but it still erro, if i'm post only one ops it come fire, when itry post muti ( ops) try come erro
-
any one have erro post from jim
15 Jun 2009 12:15:50 PM - <0> - Report created.
15 Jun 2009 12:15:50 PM - <2> - Initialize posting log file
15 Jun 2009 12:15:50 PM - <2> - Using MP run version 13.00 and post components version 10.00
15 Jun 2009 12:15:50 PM - <2> - Initiate opening the post processor file(s).
15 Jun 2009 12:15:50 PM - <2> - Post processor file name: K:SOFWAREX4GENERIC HAAS 3X VMC.PST
15 Jun 2009 12:15:50 PM - <2> - The post processor file has been successfully opened.
15 Jun 2009 12:15:50 PM - <2> - Post version information (input):
15 Jun 2009 12:15:50 PM - <2> - UPDATEPOST Version 13. was used to modify this file.
15 Jun 2009 12:15:50 PM - <2> - The file was modified by this product on 10 Jun 09 15:15:08
15 Jun 2009 12:15:50 PM - <2> - The post was written to run with Mastercam Version 13.
15 Jun 2009 12:15:50 PM - <2> - The post product type is Mill.
15 Jun 2009 12:15:50 PM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful.
15 Jun 2009 12:15:50 PM - <2> - Search for defined post variables, strings, postblocks was successful.
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'helix_tol$' was re-initialized from 0.0005 to 0.0001
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'met_helix_tol$' was re-initialized from 0.005 to 0.001
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_right$' was re-initialized from 3. to 0.
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed4$' was re-initialized from 2. to 1.
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed5$' was re-initialized from 3. to 1.
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed4$' was re-initialized from 2. to 1.
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed5$' was re-initialized from 0. to 1.
15 Jun 2009 12:15:51 PM - <2> - CONTROL DEFINITION - - Post variable 'peckacel$' was re-initialized from 0. to 1.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - RUN TIME - - Only single-axis rotation is allowed! Angles may be incorrect.
15 Jun 2009 12:15:51 PM - <2> - Successful completion of posting process!
-
i'm have same thing this prolem., my post use in x3 year ago, part make noany prolem, but check it in postdebugger, i'm know post have erro prolem.., but nc post came out ok, but use update in x4 they came erro massege green..., and some file miss, can't use post debugger in windows vista....
-
i'm try update old post or use 4 axis post turn off ques?164 but post nc out come with 1 papper masseges erro...... ,i'm using my old in x3 somany year... it working ok on cnc, but check in postdebegger they have erro...., using that update x4 or new post download in emastercam, turn off 4axis, but it still erro any one have idea
post variable 'helix_tol$' was re- initialized c.005 to 0.00001
............'met_helixtol$'.......0.005 to 0.001
............ dec_seq_right$'3.to0.
rotfeed4$,...rotfeed5$...,irotffe5$...,peckacel$, singel axis use only???>>>> some program or use contour tool
-
i'm have this prolem too in my shop i'm use x3 and x4 in vista windows,,,,, can't using postdebugger icon post, but try in home xp use x3 working good?,anyone have idea?
x4 post miss erro
in Industrial Forum
Posted
i'm have some line miss i'm don't know what line... my debugger notworking i'm can't check it, can you help me out with this thanks out time
17 Jun 2009 08:52:17 AM - <2> - The post product type is Mill.
17 Jun 2009 08:52:17 AM - <2> - Initialization of pre-defined post variables, strings, postblocks was successful.
17 Jun 2009 08:52:17 AM - <2> - Search for defined post variables, strings, postblocks was successful.
17 Jun 2009 08:52:18 AM - <2> - PST LINE (849) - The start string is missing
17 Jun 2009 08:52:18 AM - <2> - PST LINE (2142) - Label has not been defined[26]
17 Jun 2009 08:52:18 AM - <2> - PST LINE (2202) - Label has not been defined[26]
17 Jun 2009 08:52:18 AM - <2> - PST LINE (2219) - Label has not been defined[27]
17 Jun 2009 08:52:18 AM - <2> - PST LINE (3396) - Label has not been defined[26]
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ltol$' was re-initialized from 0.0005 to 0.002
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'minarc$' was re-initialized from 0.0005 to 0.002
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'helix_tol$' was re-initialized from 0.0005 to 0.0001
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'met_helix_tol$' was re-initialized from 0.005 to 0.001
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'atol$' was re-initialized from 0.5 to 0.01
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'err_file$' was re-initialized from 0. to 2.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'dec_seq_right$' was re-initialized from 3. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'bldnxtool$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'nobrk$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'nobrkxz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'nobrkyz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lnobrk$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lnobrkxz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lnobrkyz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutput$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutputxz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arcoutputyz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larcoutput$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larctypexz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larcoutputyz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcs$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsxz$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'breakarcsyz$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcs$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsxz$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lbreakarcsyz$' was re-initialized from 0. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'do_full_arc$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'do_full_arcxz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'do_full_arcyz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ldo_full_arc$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ldo_full_arcxz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'ldo_full_arcyz$' was re-initialized from 1. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'arccheck$' was re-initialized from 111. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'larccheck$' was re-initialized from 111. to 1.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed4$' was re-initialized from 2. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'rotfeed5$' was re-initialized from 3. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'lrotfeed4$' was re-initialized from 2. to 0.
17 Jun 2009 08:52:18 AM - <2> - CONTROL DEFINITION - - Post variable 'sub_level$' was re-initialized from 0. to 0.
17 Jun 2009 08:52:18 AM - <2> - Successful completion of posting process!