-
Posts
207 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Andreas Stute - InterCAM
-
-
Hi,
we just use the interfaces from www.CADCAM-E.COM web site to import 3D files from UG or ProE.
We get no request here in germany for importing 2D gerometry from UG.
regards
Andreas
-
Hi,
try Moldplus. In Moldplus you have SolidSep to split Parts in positive and negative areas. You will find Moldplus on the CNC Software Web. Without a code you can test it and see how it works.
regards
Andreas
-
Hi,
if you have a boss part you need every time a tool center boundary. It is not possible to get a pocket toolpath without it. Only if you have not boss part and a close contour you can use pocket without tool center boundary.
Andreas
-
Hi,
this is the normal effect from the actual scallop toolpath calculation. We are working with CNC Software on a new technology. This will be in v8.1 - may be not in the rel. version, but very soon with an apps. The new technology do not jump between the "collaps" areas.
regards
Andreas
-
Hi,
and in v8.1 you will also get a Rest material machining in Lathe. The geometry will automaticly calculate and you can use it as prev. geometry for additional toolpaths. Thei terminates a lot of "air" cuts. Sample: you have an inside shape. First you drill a hole. In the actual version you have to grate geometry for the ID operations. This is not nessesary in v8.1 (will come soon).
regards
Andreas
-
Hi,
CATread supports in the normal case only 3D geometry. Drawings are not supported. Here is a list of the entities we can read.
Entities Supported by CATREAD.DLL
The following three-dimensional entities (defined in the 3D modeling world) are
referred to as SPACE (SP) entities. Two-dimensional entities (defined in the
drafting and detailing world)referred to as DRAW (DR) entities and are not currently supported by CATREAD.DLL. A complete list of entities supported follows.
Space entities supported
Point (Type: 1)
Line (Type: 2)
Parametric Curve (Type: 3)
Plane (Type: 4)
Parametric Surface (Type: 5)
Face (Type: 6)
Edge (Type: 12)
Volume (Type: 7)
Transformation (Type: 9)
Ditto (Type: 28)
Conics (Types: 20,21,22,23)
Composite Curve (Type: 24)
Solids - Mockup (Type: 17, secondary type: 1)
Solids - Exact (Type: 17, secondary type: 2)
Polyhedral Surface (Type: 16)
Model Specific entities supported
Color Tables
Master Workspace
Details(SP & DR)
Geometric Set
Unsupported entities
!!!!! Drafting Entities will not be supported !!!!!!
If an entity does not appear in the above tables, it is not currently supported.
Unsupported ALL DRAFTING ENTITIES
Unsupported SPACE entities
Constraint
Net
Law
take a look to www.moldplus.com
you can download the converter for testing.
-
Hi,
there is a on-line help available for Posts.
MP.hlp incluses all new stuff for the posts in v8. You will find it on the v8 CD or at the BBS from CNC Software.
regards
Andreas
-
Hi,
if you have a file who blow up Mastercam, yo have to send it to [email protected] or [email protected] ;-)
We are testing actual many things for sending Acad files to Mastercam. There is stil a problem. try the STEP interface from Mastercam. We get god results with this.
Andreas
-
Hi,
in v8 you can select any type of 5 axis toolpath in the xform function. It works.
regards
Andreas
-
Hi,
because MechanicalDesktop is a add on on Acad it use not the same database.
You have to write just the SAT Solids out. Not more. Here is also a statement from CNC Software about sending file from Acad to Mastercam. Try it in v8. Mastercam do a lot of imporvements in v8 for SAT.
The Info is for DWG, but the main process ist the same for SAT.:
Several users and dealers have inquired about issues importing Autodesk Mechanical Desktop files into Mastercam. The most common issue is, “There are no entities in the converted file”. The cause for this has to do with the structure of the DWG file coming from Mechanical Desktop. In Mechanical Desktop, different levels of “intelligence” are stored in structures called Nested Blocks. It is similar to stacking blocks on top of each other, the next level always building on the first, so that when completed a Mechanical Desktop file with Assembly information will have 3 levels of nested blocks. The lowest level is the wireframe geometry. The second level of information is any ACIS information. These two levels would make up any solid created with AutoCAD 2000, the next level is specific to Mechanical Desktop. The third level of nested block would be the parametric data added by Mechanical Desktop. Mastercam can only read DWG files with the first two levels of information. To import files successfully, the parametric layer must be stripped out of the Mechanical Desktop file. A tool within AutoCAD called “explode” allows the user to strip the nested block layers, one at a time. Therefore, the user must “explode” the Mechanical Desktop entities once and then save the file. This saved file can then be read into Mastercam properly. Exploding the file more than once will result in the saved file containing only wireframe data and the solid data will be lost. Exploding the entities as described will result in the parametric data being eliminated, including any assembly information. Therefore, a backup of the file should be saved first before exploding.
-
Save the library as a TXT file. Use an normal editor and change the values with find&replace. If done, you can import the txt file in a new library and compress it to the binary format. This works.
Andreas
-
Hi,
the shortest way is to rename all mc7 file to mc8.
rename *.mc7 *.mc8
thats all.
Andreas
-
Hi,
this messages looks like that you use a entity who is connect with a toolpath. Or was used by a toolpath - correct?
Andreas
-
Hi,
call
Dr. S. C. Jonathan Lin and Dr. F. C. Tony Shiue
Phone: 734.930.0813 Fax: 743.741.1927
take also a look to the tutorials from Inhouse. They have v8 tutorials. http://www.emastercam.com/resources/
more manuals you can find under: http://www.mastercamedu.com/curricul.htm
-
It is in. I can use it in Rotate, Mirrow, Translate
-
Hi,
does you use the original US version or a translation?
Somtimes there is a translation bug.
A. Stute
-
Hi,
I think actual is one forum OK. When you split up the forum in many pices it takes more time to check all forums. Perhaps it is better to extend the topic line and the view methode.
When you put in the Topic the Function: This is a Topic for: 1) Design 2) Mill 3)...
it shows for that it is. Now you can insert the view for topics:
example: show all new topics from the last 5 days who are mark for Mill.
And if you want to see all you can select : show all topics.
Good idea?
-
Hi,
which wersion of APPS do you use. The latest one for v7.2 was appmch72.dll Version 80_34, dated thru 04/24/00. CNC instert there some bug fixes for Leftover. And in v8 it is much better.
regards
Andreas Stute
-
The NetHASP is actual tested at CNC. It will not come out when v8.1 is ready, but soon. The software for Network software is in v8.1.
For detail you have to ask CNC Software.
-
take a look to the EngravPlus from CAMaix at www.camaix.com
You can create also with a chook 3d geometry from any true type font/character.
-
Hi,
try the follow:
create a geometry from the orgin part and rough them. Then use the new part (pre machined) and do a remachining toolpath from the last operation (msurf, rough, contour - remachining).
-
Hi,
Wire Version 8.1 will have a lot of improvements and changes. We are testing actual the Beta version. We also spend a lot of time in developing the post. Actual we do a post optimizing with my dealer Unicam for Agie controlls - this is done. The next step is Charmilles. We are working very close with the Agie/Charmilles/Bostomatic goup here in germany.
The post department is working hard to take functions from the controll in the software/post. If you can wait some weeks I'm sure the new wire will help you and bring us back to the wire edm market.
-
also yes for germany. We have some customers here who are working in 2D and some in 5 axis.
-
Hi,
in v8.1 it will be in. Here is a item form the v8.1 list:
Verification using an input file as the initial stock - any file with trianlges, solids or surfaces (IGES, X_T, MC8, STL, etc)
Verification can now save the result of a session to an STL file
It will take some time til v8.1 is done.
Backplot -- Lollipop End mill
in Industrial Forum
Posted
This is, because it works like it is designed. Wait to v8.1 - this will support what you need.
Andreas