Corian is actually a breeze to cut, like cutting wood. It can get messy, so I have a vacuum system.

I used a 1/4" carbide ball to cut the leaf.

I have to confess, I did not make that leaf with Mastercam. I used a demo version of "Cut 3D". The demo has 4 models with the leaf being one of them. The models can only be cut using their program. It's actually a neat little program and cheap, but certainly could not replace Mastercam.

Ok I'll share. This was made with Corian. It matches our kitchen counter tops.

That did the trick. THANKS John!

I am trying to export to parasolid "X_T" for my customer who is using Unigraphics NX version 4.

Export using mastercam 9.1: His error message is "invalid file contents"

Export using mastercam X: His error message is "error in schema"

I am able to export and import these files with Mastercam with no problems.

Any Ideas if this is a problem on my end or his end? I really don't want to export to IGES. Is there any other solids format that is compatible with Unigraphics?

Thanks

Hardmill converted it for me. Actually each file was of the same part.

Thanks Hardmill!

I emailed the files.

Thanks!

Can somebody convert two pro-e (.prt)files to Mastercam V9 or X. The two files are located in the FTP site folder: files_to_be_converted_to_mc

the files are:56211_5.prt & 56211p01_0_4.prt

Thanks in advance!

Does anybody know any way to convert a Mastercam solid into a 3DS Max file?

Thanks

Thanks for the conversion. The file had a .prt extension, isn't that Pro-E?

Thanks for your try Kannon.

It's on it's way!

Thanks very much.

I have uploaded 7000722-05.prt to File_to_be_converted_to_MC folder. Can someone please convert to 9 or X.

Thanks

Hey, don't ask me to give up my BF2 time! Thats what relaxes me the evenings.

I am defiantly in the “hate the X interface” camp. I have been using Mastercam since V6. Becoming fully proficient and learning all the little nuances has taken years. Now comes along X and I have to start over? I keep reading “it takes time” or “you need training”. What gets my panties in a wad, is I am the one who signs the checks. Exactly how much is it going to cost in training or lost productivity? During development of X, did anybody at CNC Software ever think of how much this new version was going to cost it’s customers? If we were to add up all the lost hours for everybody that is using X, how much would that be? I guarantee it equals big bucks.

I have already invested the time to learning Mastercam. Why should I be forced to do it all over again?

Thanks, thats what I needed. I rarely get Pro-E files, it's not worth buying the converter.

Thanks Again!

Could somebody convert a Pro-E file to MCX for me. I uploaded 74165.prt to the unspecified_uploads folder.

Thanks

What if all I need is 3 axis, will my maint be less now?

You are not really buying the jacket, just leasing the right to wear it. And don't forget about the yearly maintenance fees.

I know that CNC can't please everybody all the time. But my sentiments are not unique, there are many who feel as I do about the interface.

I guess I should invest in a good pair of rose colored glasses and be happy.

To a lot of people on this forum X is like the Edsel. Some lofty ideas just havn't panned out for X.

Some people have rose colored glasses on and will never admit to any of the problems. The X interface is clumsey and not intuitive. Just because something is new doesn't make it better. I am a fan of Mastercam, but I hope some of the interface gripes from the forum are addressed or X might be compared to the Edsel in years to come.

I totally agree with part_timer's sentiments.

As a user and the one who signs the checks, I really hope they take a serious look at the interface and make some big changes.

I feel that X just isn't ready for prime time. Too many problems need to be worked out before I use it full time. The deal breaker for me is not being able to print, and yes I have tried all the tricks suggested on this forum.

I also find the interface really objectionable. Granted I have not invested the time required to fully learn it. Too many problems need to be addressed before I stop using a "great" version 9.

Oops, I just re-read your post.

Although, I'm sure the grandson is cute, I really would'nt want him on an ornament.

Thats cool. I would love to make an ornament. Please share the design with the forum.

Amen Brother!

I overwrite NC files all day long. I only care that the NC file matches the file name. The file name = the job or Mold number. I work on different molds throughout the day.

'machine_group_1.nc' doesnt cut it.