On 3/2/2017 at 6:21 AM, The Cathedral said:

 

 

 

I thought you guys were supposed to be gurus.

 

*.EQN files are equation files used by a few chooks like fplot. You can use them to draw sine waves, involute splines, or other trick things:

 

https://youtu.be/LG3ro7u-izU?t=129

I ALWAYS say I know enough to be dangerous no more or no less. ;-)

The FTP is back up. it was down for a little clean up.

It will switch like top almost every time correct?

if you take the Mastercam U course I show you how to do it in 2017 bringing fixtures and vises and align with the WCS of the part.

go back into the operation and choose chains and look for the icons in the picture.

Just thought I would share a link from our main site about one of new add-ins coming with the new V8 Cimco Editor Pro.
Before you would need DNC-Max, but now you may not need all the controls that our DNC-Max has. so they are adding FTP to the editor. So if you have one machine you need to connect to with FTP you will be able to use your Editor for this. coming soon

http://www.cimco.com/news_description.php3?id=221&date=5_Feb_2016

The switch is in the Customize and the last tab.

Verisurf dose a great job of this.

What Machine Def are you using and how did set the planes?

Can you share the file?

Here you go this also contains X6 files

proe_3719-1208_main_05_0.zip

Mike testing started in 97 I remember the year my older son was born. that was fun to beta test. LOL

X6 is close and it supports SW 2012.

I have to say really nice. but still finding all the toys in it.

take the launch icon for MC and put it on the right monitor and see if it pops up there.

Joe , Really the dealers need to and as of a few years ago at the Dealer conference allot of them jumped aboard and now sell them to there customers.

[ 05-11-2010, 05:42 PM: Message edited by: Jay Kramer @ Precision Programming ]

I do op of Gcode and the main on the left.

Does the V9 see the Hasp ok when did you move to XP SP3?

he is the 5x guy for CNC great guy.

have you tried a band saw for rough then a path for finish?

I second that along with being able to lock on the level mgr.

That's right Strabe better check with your dealer because John is not YOUR dealer Just a dealer. LOL

So ask the boss and go home and work for free WOO-HHOO free work.. once again LOL

All I can say is I could not work without WCS these days. I jumped right on when it came out in V9. this has done nothing but get better every time the software grows.With Dynmic WCS I feel we really don't need most of the other options in WCS now.

Did it work for you?

Fred use the Cimco editor sir.

(need to install v9 to test v9 lathe maybe verify on v9 is better than vx.)I can tell you now that it is not better, but are you talking the fist VX or the latest. Also contact the office as Mallissa can get you the V9.