hi i`m looking for the book mastercam v9 mill and solids from mr lin and mr tony shine ,but i emailed a few places (opamp books, sholarsbook etc)and i haven`t get any answer, so can anybody here on the forum give any tip to find a bookstore with this book.thank`s in a dvance

hi i have one program with this sequence(for fanuc): % 0001 n1#2061=1 (number of pocket for the tool) n2#2062=2 n3#2063=3 n3#2064=4 G90G20 T[#2061] (tool 1 ready to start on the arm of the machine) T[#2061] M69 (change for the tool 1 s400 m3 g54 t[#2062] (tool 2 ready to start on the arm the machine) G0 X Y G43H[#2061]Z1. Z-1. G41D[#2061+100] X Y that means the control read on the offset table with h1 and D101(the table have 200 values 1-100 lenght offset and 101/199 compensation).ie the tool is 1(from variable #2061 with d101 after makes the contour G40D[#2061+100] xy z1. that is more pratical to organize tools on the magazine because it just necessary put the tools on the program .so my question is:there is possible build something like that on the mpfan.pst.regards