Chris Parish
-
Posts
250 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Chris Parish
-
-
cam dude:
All this and n0 one has mentioned the "circle" yet...
Welcome back
-
david:
I don't believe aggregate is supported with mill..only router has this been available..
I do however see many people using "right angle heads" in mill.. We use one ourselves
-
IwoaJim:
typo -- was supposed to be M198 (I had program right just not in forum)
James:
bonehead I am -- I changed bits from "left to right" not "right to left"... (thank god I write them all down)
Thank you all for helping, can't wait to cut
THANKS
-
John:
Hey ..we have an "open house" next week.. Ijust tried evrything on the "sheet".. it didn't work
gives me "071" data not found
I have a main using M98 P1234.. and on my memory card is O1234 (no extension)
Do you have anything else to try... please let me know
Thanks,
Chris
-
Hello:
I have a program to big for the memory... how do I drip feed from the compact flash card using M198... I have changed the "I/O" channel to 4 to see the card but it still won't let me run the program... are there any other parameters that need to be set/ changed ??
Please let me know
Thanks,
Chris Parish
-
Dareman;
thank you.. it is for converting a "espirit" user to Mastercam... it was the "only" thing holding them back on the sale
In the past I have talked to Roger Martin at CNC Software and he has mentioned that its on the list to get done
-
to all:
Does anyone have the "aluminum" e-packs availble for a mitsubishi wire (say Fx / Fa) series Edm machine
Please let me know ... Thanks
-
Hey:
Under the misc. integers... I have G28 X0., G28 Y0, or G28 X0.Y0.
pretract
etc etc
pbld, n$, sgabsinc, *sg28ref, "Z0.", e$
g28_rtrn = prv_mi7$ #Set flag for safe toolchange position
pbld, n$, *sg28_rtrn, e$
Then make a string select like this...
#Safe Toolchange Position
sg280
sg28X0 "G28 X0." #reference return in "X"
sg28Y0 "G28 Y0." #reference return in "Y"
sg28XY0 "G28 X0. Y0." #reference return in "X" and "Y"
sg28_rtrn #Target string
fstrsel sg280 g28_rtrn sg28_rtrn 4 -1
Hope this helps....
-
Storky:
I just replied on your (developers forum)..anyway I have been in the office a lot lately... Everyone wants to buy but waiting ...typically answer ...so I have been doing a lot of post writing / tech support /... etc etc
-
Storky:
Charmilles Robofil 2050TW.. I have a Charmilles Robofil 4020 (charmille control)/ 440CC (fanuc)and finally a 240 CC with fanuc control
Call me if you need something
-
make a variable of depth = depth*-1
but make sure you reset it back.. so your other "Z" values don't invert the number
If you need help... please e-mail me.. I have done a couple of posts for these controls
-
In the post...
breakarcs : 2 #Break arcs, 0 = no, 1 = quadrants, 2 = 180deg. max arcs
-
Shawn:
Call me and e-mail me the part.. Me and VInce will take a look at it
-
I see Rickylim84 writes a lot of "one liners" in the developers forum mentioning other softwares for comparing to .... interesting
-
Storky:
a reseller ?? ... you had me at "hello"
-
Guys:
it is like our old version of "cnc reg"... standard windows -vs- mastercam... I have seen this also... If it is set to Mastercam ... there is a huge delay...by setting it to "standard windows"... it opens rather quickly...
In Mastercam "X" the 'cnc reg" is part of the control panel in Windows...
I also recently had one that the customer wanted the "mastercam" (bitmap) but it was slow to open... I went to the hardware accelerator and changed it to "one click" above none.. it worked... Hmm dumb luck I guess... but it worked
Hope I can help
-
same thing... In X2 it's on the page where you fill in speeds/ feeds coolant etc.. just below it click on "force toolchange"... (just above the comment field)
-
James:
come on you know the drill... it comes down to return on investment... quick buck so they can spend it on other areas of development... unfortunatly it has been too long
-
+1000 Lars
nice....
-
Perseid88
Mr0904... is maint release V9 spet 2004...get rid of it
mcamvb... Hmmm by itself or in a sub directory.. you can most likely delete it
-
11 min 25 sec
Dell precision M60 laptop
1.8 w/ 2 gig ram
-
Htm01
Thank you.. One of the guys here just bought a new bike... so nice little project for him
Thank you
-
Lars:
Manual entry was changed quite a bit... you can copy the Pcomment 2 post block form the generic 3 axis mill post and copy it into your "v8" post... a couple of simple little edits and your on your way... if you have any questions, please give a a shout...
-
Shawn:
just checked with "support" as well ... seems to be broken at the moment... I believe it writes out to a "prm" file then it reads back in... It is now submitted as a "bug"
Thanks
Video card problems
in Industrial Forum
Posted
believe it or not:
check and see if you are running any of the logitech software for your mouse / spaceball
I talked with tecj support and I did believe it but it really did work once it was uninstalled