Hi , I'm a user of Dual Core CPU and I got some bottleneck with my cpu. I want to add a second Dual Core CPU to boost performance(2 Cpu and Quad Core) does mastercam x2 support Quad Core or more. Regards ,

I have posted my MC9 file to the ftp folder MC9_Files directory as yasar_swarf.MC9. In this file you'll see the toolpath of the part we want to machine and what we get when we post it.You will be able to see the "surface" on the 1st level and the "Result Toolpath" on the fifth level. I hope it helps you to understand our problem much more clearly. The problem is again the tool's not following the path as it is seen on the toolpath when it is posted but follows the path as it is shown on level 5. The posts used are : MPfan V9.0 MPokuma V9.0

The 4 axis in swarf is allready working but not as we like it to be. So what can it be done to make it work right with a post thing? Btw I gotta tell that altough it look ok in mastercam we can't get the right result when we post it. Anything to do for that? Tested in two milling machines : Okuma MX-55 VA OSP 100M Supermax 65A Fanuc OT Both 4 axis

Hi! I am a Mastercam V9 Level3 user. I have 4-axis post processor, but in swarf5, i cannot create a 4-axis tool path. In order to create 4-axis tool path processing in swarf5, do we need to have 5-axis post processor? Best Regards,