I'm using Mastercam X6 and when I open it I do not have the Status Bar showing on bottom. Does anyone know how to fix this.

Hey Guys, Thanks for your help. I loosened the tolerances and filtered some of thr tool paths. And our IT guys downloaded the new drivers. I got thru the verify and it has not been crashing since !!!! Thanks Again......Tom

Hi All: Need help !! Verify keeps crashing or hanging up on me. I'll give some details. It happens no matter if I use a solid as stock or a stl file as stock. I also changed the Tool tolerance & STL tolerances in verify, speed and quality. Filtered tool paths. It will run part way thru stop and hang up or sometimes creates what looks like a hole in the stock. See attached files It will run thru if I uncheck Use TrueSolid. But I would like to create some stl files for using in Rest Mill operations (which require a stl file) Also you can not move the part in verify when Use TrueSolid is unchecked. I'm using MasterCam X4 MU3( I also ran it in X5 MU1 same thing happens) on a Dell Precision T5500 3G RAM windows XP Professional ,32 bit ,with a Nvida Quadro FX 580 Video card (512MB) Should I upgrade the Video Card? Or add more Ram or upgrade the computer in any other way? Any Suggestions on what Video card to install? Or anything that would help solve this problem. We do 5 axis work and use the Surface High Speed and Multiaxis toolpaths alot. Thanks, Tom

Hi Luc I'm not really sure what you mean by a Fanuc Macro B. Is this something you do using a Fanuc Control? I'm programming for Haas controller. Would it work on this type of controll? If so could you please send me an example of how you do this. Thanks, Tom

I'm using Mcam_X4_MU3 and would like to create a custom drill cycle, using G01 with a feed to a depth, then change the spindle speed and feed to another depth with a new feed rate, dwell, then feed out at a new feed rate. How do you go about creating a custom file under toolpath, drill,cut parameters, then the cycle drop down menu,custom cyle9 ? Or do I need to do it some other way. Thanks, Tom

Thanks it worked. I unchecked( tools sequentially) Thanks for your help !!

When coping tools from the Part to the Library in the tool manager The tool numbers change How do I keep the tool numbers the same. Thank You