talley
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by talley
-
-
If you open your post and search for this switch you can set it to no
That will pull the G97 start before the G96 out.
I do find it strange that the control won't recognize the the G96 since it is called after the spindle start though
thanks i got my post open and that fixed it
-
im working in mastercam x5 and when i change tools in lathe it homes all the way for every tool change i have tried to set the user defined section in parameters but it still homes has anyone had this problem?
-
ok could you tell me how to get my post open i have never had to do this before
-
Im useing mastercam x5 lathe on a tl-1 haas lathe but when i tell it my max rpm and min rpm it wont change speeds it stays a constant rpm its posting a g97 in front of my g50 and g96 so its not varying has anyone els had this problem?
-
we just got a haas tl-1 at work and ive been programing lathe parts on mastercam x5 and i was woundering what machine do i need to pick for my default and how do you set up and use constant surface feed
-
i have started to program parts on a tl 1 haas lathe and i am programing on mastercam x5. what happens is i tell the roughimg pass to cut .02 deep but instead it gose .1 on the first cut it dosent want to take the numbers i put in dose anyone have any ideas ?
- 1
-
we have just bought a haas tl-1 cnc lathe and we are trying to find out what kind tool post would be best. We are thinging between a dorian or a aloris if anyone has one or has used one what are your thoughts. We are looking at a dorian sd35cxa tool post dose anyone know how it is please let me know. Also is the tcmt style cutters good for general puropse turning?
thank you i know this is alot but it would really help
Talley
-
Is the -.02 just stock for cleanup?
yes it is just a small cut i have to make then i have to size it when i turn it over
-
CHECK YOUR ABSALUTE/INCREMENTEL SETTINGS
i tried that but it wont change ive done this before and it worked but i dont know why it wont now
-
im useing mastercam x5 and i have to face a part -.02 and after that i have to cut deeper into the parth i put my top of stock -.02 and my depth at -.05 but it only cuts it to .03 have any ideas ?
-
i need help seting this up i have to start .05 below a fixture i have but when i put -.05 on the top of stock section it wont do it it still starts at my touch off point any one have ant ideas?
thanks Adam
Lathe Home
in Industrial Forum
Posted
but dose any one know what to change in the post im useing generic fanuc 2x lathe .pst