Marty A
-
Posts
437 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Marty A
-
-
morning thad yea were pretty busy here. we have a night shift again. i'm down on the floor programing and running the okuma.i stay pretty busy. i found where to get my black screen back.everything seems to be ok except after i post out a program the text page that comes up after looks different than before,but seems to be ok. anyway they hired a guy to run the cnc department now, he wears nice clothes tho.lol
well talk to ya later bud.
p.s. yea i know it's early i start at 5 to get some gramming done.
marty
-
thanks guys and no thad i do not have them backed up. now how bad is it.arp that worked thanks again
marty
-
hey thad hows it going with you. still says current english.i rebooted pu and still the same.
also i think i clicked on save for something i can't remember what it was.hellllllllllp also how do i get rid of all my toolpaths that show up
ok it said save settings to configuration flie i said yes.
marty
[ 08-20-2007, 10:34 AM: Message edited by: Marty A ]
-
hi all well some how i messed things up today.i was trying to convert a metric flie to english.well it is not working. i know to go to configureation and switch over but it already says english.and my file is still metric.sooooo
i clicked on the file icon to the left,i then clicked on merge initial english values,bad move
i now have a blue screen where before i had a black back ground, and now when i open a file up it shows all my toolpaths.yea you could say i,m lost now. thanks in advance.
marty
-
thanks again guys i knew it was something
will try the post and see what goes on.
going home now you have a good weekend
marty
-
nope leaving no stock,it should have followed the arc seeing it is a .252 rad.but ithink you are right when you say it needs some breathing room. thanks kannon and no you did'nt misunderstand i tkink you hit it right on.
oh and yes quickmike i start at 5 am yea it's early
marty dazed and confused
-
just a rgeular 2d pocket. thanks
-
moring evryone i got a little problem.
i,m probraming a pocket with .252 rads in the
corners.no biggie i thought.i program it with
a 1/2 end mill.ok no problem it looks good in verify.ok they go to run the program and it didn,t post out rads just straight lines.so i post it out with a 3/8 end mill and every thing is fine.i don't know why the 1/2 em did'nt work.
i can't figure it out.any ideas?maybe a setting some where i don't see?. thanks in advance for any thoughts on this.have a good day all
marty
-
thanks hardmill will get on it now.
marty
-
been trying to figure this out. did'nt
really understand the help.what i need
is to make a new ops manager for a diffrent machine.using mx mr2 now. as always all
the help is greatly appreciated.
marty
-
just checked it out on my way out.looks good to me.thanks again john have good a week end
marty
-
hey all, i,m sort of hen pecking my way here
what is the easiest way to make a new tool library,as of now i copied my origanl and just
started to edit for my new one.kind of a pain.
didn't really understand the help.ok going home now thanks as always. have a good day all
marty
-
thanks john thats what i thought
-
hey all. what level of mastercam do you need to program in solids.i'm running level one now with no solids package. thanks
marty
-
thad how did you do that.can i do for 2d?
marty
-
ramping is the for me now.thanks thad i use ramping on keys and small pockets.never thought
to use it for holes. thanks every one
marty
-
thanks guys i'm going with the ramp down. i will
get back with ya.
marty
-
ok i can only see the tool go around my hole once.i can,t see the tool go around after that
so i don't know how much of a step i'm taking.
i am use the single step for this.my backround is
black
marty
-
hey thad. can't see the blue lines like before.
marty
-
hello all just got my post all ready to
go from my reseller.so i'm back to mx.when i am back plotting a hole that i'm helicing down i can't see what the step down is.like in ver 8
i could see the path but now there is'nt any.as always any help is greatly appreciated.
thanks
go tigers
marty
-
thanks fella'a got it to work been racking
my brains.thanks again
marty
-
ok i did a pretty long search on this
but didn't really find what i need.
how do you get mx to pick all the holes
of the same size like it did in v8.1.1
autom.
marty
-
thanks guys worked great.break many plcs worked
but i used thads way that seemed to work better
for me.hey thad there busy on the floor but
design is real slow.could be slowing down here
real soon for me.things have been going good
still getting the new condo in order.talk to ya
later bud and thanks again guys.i'll be back
marty
-
well i took the mx transition class last week
all is going pretty good so far.i have all
my post and librarys and ops all updated.
so far so good.but i just can't seem to
break a freaking line in half.man i know
it's easy,but i just can't seem to get it.
any advice is alway's appreciated.
marty
bad move
in Industrial Forum
Posted
thad you have mail