capmkrk
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by capmkrk
-
-
Hey guys i just started a company that just bought a new UMC 750. I and another programmer are using X9, but have no 5 axis experience. We have been able to run a few jobs using the WCS, but have recenly been given a job that needs full 5 axis machining, and we have no idea how to pull it off. We have heard about HAAS using dynamic work offsets, and have a post to support it, but which multi-axis toolpaths and setting up the job are proving to be a real challenge. Any advice or direction that can be offered would be greatly appreciated.
Thanks alot
-
I get this output from my post:
(CLEAN TOP)
N9
G91 G30 Z0 M5
G91 G30 X0 Y0
T9 M6 (3.15 VALENITE SHELLMILL)
(RAPID = Z.25)
(MAX DEPTH = Z0.)
G0 G90 G54
X12.6376 Y2.975 S5500 M3
G43 H9 Z.25 /M8 T21
Z.1
G1 Z0. F50.
X-12.6374
Y0.
X12.6376
Y-2.975
X-12.6374
G0 Z.25 M9
G0 G40 G80 Z2.
M9
G91 G30 Z0 M5
G91 G30 X0 Y0
M1
(DRILL THRU)
N21
G91 G30 Z0 M5
G91 G30 X0 Y0
T21 M6 (X DRILL)
(RAPID = Z.25)
(MAX DEPTH = Z-.8)
G0 G90 G54
X8.8125 Y-1.8019 S3000 M3
G43 H21 Z.25 /M8 T11
G98 G83 Z-.8 R.1 Q.1 F20.
X0.
X-8.8125
Y1.5032
X0.
X8.8125
G0 G40 G80 Z2.
M9
G91 G30 Z0 M5
G91 G30 X0 Y0
M1
How do I get the tool comments to output at the end of the Sequence Number
example:
N9 (CLEAN TOP), N21(DRILL THRU), etc.
Thanks alot
-
Hey, EX-Programmer, that did it I have my comments back, thanks alot it was driving me crazy!
Thanks again
-
I,ve been doing some post editing, and at one time I had comments i entered in the Comment field i.e. Face Top in the tool definition dialog posting out. Now i have lost those comments. How do I get those comments back?
Thanks
-
OK, Thanks alot Ray D, I copied and pasted your snippet into my post, and the comments/code are coming out as desired.
Thanks alot
-
When I enter text in the Manual Entry dialog, as code the text posts enclosed in parenthesis. As code it should not have parenthesis around the text. How do I get rid of the parenthesis?
Thanks
-
What is a good resource to learn Mastercam X5(.MMD) Post programming/editing, or (.SET) in a tutorial format that does'nt require a classroom, or is not the Mastercam Reference Manuals. I have seen a neat setup sheet that was produced with a modified MILL.SET post.
Thanks
X+ for 2018 install problem
in Industrial Forum
Posted
My company has just installed Mastercam 2018 and is is working, I have downloaded and unzipped the X+ for 2018 app. However I get a X+ setup box saying: Mastercam directory not found\installation aborted. Any help would be appreciated.
Thanks