I just got it to down load. I’m trying it out now.

Yes during installation.

We only machine dry green ceramics and only one of are machines had grease. We installed a lube system on it now. Before that we would get .025 slop in a month. Now it last about 8 months. We would only use this machine for thickness. The ceramic would make a lapping compound. So we went to lube in hopes to wash it away. We have a Hardinge mill with bellow covers over top of the hard covers on each axis and two dust collection systems in side this machine. We also have a Haas VF7 with lube we just installed bigger injectors to help with washing any air born dust off of the ball screws. We were getting 10 months on ball screws and two years on rails. We will see how the bigger injectors work

I had a custom setup sheet made for me from X - X4 and now it will not work for X5. I would like to try to use X+ because it looks close to what I had. But when I tried to down load it came up in German. Like post #17 said (If you downloaded the English version it installs in German but when you run it will be in English...) when I tried downloading this I got error messages in German. My operating software is XP.