Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
(NC - C:\USERS\STEVEN\DOCUMENTS\MY MCAMX5\MILL\NC\PROGRAM NAME HERE.NC)
(****** Note From Programmer ******)
(MANUAL ENTRY AREA FROM PROGRAMMER)
(PROGRAMMER WANTS ABC SETUP)
(SETUP - MAN MUST FOLLOW EDF)
(CONFIRM FIRST ARTICALS TO Q.C)
(********* Tool List Info *********)
(T1 -3" FACE MILL - H1 - D1)
(T2 - 1/2 FLAT ENDMILL - H2 - D2)
(T4 - 1/4 DRILL - H4 - D4)
(T3 - 3/8-16 TAPRH - H3 - D3)
(T5 - 3/8 FLAT ENDMILL - H5 - D5 - R0.0500")
(******* Work Offset List *******)
G54 (I type these work offset in, not automatically generated)
G55 (I like the post lists automatically)
G56
G57
G58
N1 ( CHECK INSERTS BEFORE RUNNING )
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T1 M06 (3" FACE MILL)
G0 G90 G54 X-8.3 Y-.7501 S6000 M3
G43 H1 Z2. T2 M8
Z.2 G1 Z-.0001 F100.
X1.8 F50.
Y-2.2499
X-8.3
G0 Z2. M5
G91 G28 Z0 M9
M1
N2(USE OLD END MILLS AS POSSIBLE)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T2 M06 ( 1/2 FLAT ENDMILL)
G0 G90 G55 X-3. Y1.25 S8000 M3
G43 H2 Z2. T4 M8
Z.2 G1 Z-1. F100.
G41 D2 Y.75 F30.
G3 X-2.5 Y.25 I.5 J0.
G1 X0.
G2 X.25 Y0. I0. J-.25
G1 Y-3.
G2 X0. Y-3.25 I-.25 J0.
G1 X-5.
G2 X-5.25 Y-3. I0. J.25
G1 Y0.
G2 X-5. Y.25 I.25 J0.
G1 X-2.5
G3 X-2. Y.75 I0. J.5
G1 G40 Y1.25
G0 Z2. M5
G91 G28 Z0 M9
M1
N4(CARBIDE DRILL FOR THIS JOB ONLY)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T4 M06 ( 1/4 DRILL)
G0 G90 G56 X-4.2277 Y-1.4433 S2000 M3
G43 H4 Z2. T3 M8
G98 G83 Z-.5 R.1 Q.1 F10.
X-.6867
M5
G91 G28 Z0 M9
M1
N3(ROLL TAP)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T3 M06 ( 3/8-16 TAPRH)
G0 G90 G57 X-4.2277 Y-1.4433
G43 H3 Z2. T5 M8
M29 S200
G98 G84 Z-.5 R.1 F12.5 P100.
X-.6867
M5
G91 G28 Z0 M9
M1
N5(BRAND NEW TOOL NEEDED)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T5 M06 ( 3/8 FLAT ENDMILL)
G0 G90 G58 X-2.7157 Y-1.6796 S8000 M3
G43 H5 Z2. T1 M8
Z.2 G1 Z.1 F5.
G2 X-2.0673 Y-1.3026 Z.0383 I.3242 J.1885 F20.
X-2.7157 Y-1.6796 Z-.0235 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.0852 I.3242 J.1885
X-2.7157 Y-1.6796 Z-.147 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.2087 I.3242 J.1885
X-2.7157 Y-1.6796 Z-.2705 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.3322 I.3242 J.1885
X-2.7157 Y-1.6796 Z-.3939 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.4557 I.3242 J.1885
X-2.4505 Y-1.8615 Z-.5 I-.3242 J-.1885
G1 X-2.4795 Y-2.0435
X-2.4585
G3 X-1.9905 Y-1.7673 I-.0105 J.5524
G1 X-2.9475
G2 X-3.0215 Y-1.4911 I.4785 J.2762
G1 X-1.9165
G3 X-1.9905 Y-1.2149 I-.5525 J0.
G1 X-2.9475
G2 X-2.4795 Y-.9387 I.4785 J-.2762
G1 X-2.4585
G0 Z.25 G0 G0 X-2.2815 Y-1.1161
Z.2 G1 Z-.5 F5.
G41 D5 X-2.6565 F20.
G3 X-3.0315 Y-1.4911 I0. J-.375
X-1.9065 I.5625 J0.
X-3.0315 I-.5625 J0.
X-2.6565 Y-1.8661 I.375 J0.
G1 G40 X-2.2815
G0 Z2. M5
G91 G28 Z0 M9
G28 Y0
M30
%
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.
Post Processor Development Request
in Post-Processing
Posted
Hi,
I would like to list all my workofset in my post and the rest of my post is fine. I wonder how much does it cost? Please take a look the lines below
################################
%
O0000 (TEST PROGRAM)
(This Post Is Only For - HAAS)
(Unproven/ Proven By: )
(ALUMINUM INCH - 2024)
(***** Posted Date And Time *****)
(JUL.05.2012 @ 3:26PM)
(Source - C:\USERS\STEVEN\DESKTOP\TEST PROGRAM.MCX-5)
(NC - C:\USERS\STEVEN\DOCUMENTS\MY MCAMX5\MILL\NC\PROGRAM NAME HERE.NC)
(****** Note From Programmer ******)
(MANUAL ENTRY AREA FROM PROGRAMMER)
(PROGRAMMER WANTS ABC SETUP)
(SETUP - MAN MUST FOLLOW EDF)
(CONFIRM FIRST ARTICALS TO Q.C)
(********* Tool List Info *********)
(T1 -3" FACE MILL - H1 - D1)
(T2 - 1/2 FLAT ENDMILL - H2 - D2)
(T4 - 1/4 DRILL - H4 - D4)
(T3 - 3/8-16 TAPRH - H3 - D3)
(T5 - 3/8 FLAT ENDMILL - H5 - D5 - R0.0500")
(******* Work Offset List *******)
G54 (I type these work offset in, not automatically generated)
G55 (I like the post lists automatically)
G56
G57
G58
N1 ( CHECK INSERTS BEFORE RUNNING )
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T1 M06 (3" FACE MILL)
G0 G90 G54 X-8.3 Y-.7501 S6000 M3
G43 H1 Z2. T2 M8
Z.2 G1 Z-.0001 F100.
X1.8 F50.
Y-2.2499
X-8.3
G0 Z2. M5
G91 G28 Z0 M9
M1
N2(USE OLD END MILLS AS POSSIBLE)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T2 M06 ( 1/2 FLAT ENDMILL)
G0 G90 G55 X-3. Y1.25 S8000 M3
G43 H2 Z2. T4 M8
Z.2 G1 Z-1. F100.
G41 D2 Y.75 F30.
G3 X-2.5 Y.25 I.5 J0.
G1 X0.
G2 X.25 Y0. I0. J-.25
G1 Y-3.
G2 X0. Y-3.25 I-.25 J0.
G1 X-5.
G2 X-5.25 Y-3. I0. J.25
G1 Y0.
G2 X-5. Y.25 I.25 J0.
G1 X-2.5
G3 X-2. Y.75 I0. J.5
G1 G40 Y1.25
G0 Z2. M5
G91 G28 Z0 M9
M1
N4(CARBIDE DRILL FOR THIS JOB ONLY)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T4 M06 ( 1/4 DRILL)
G0 G90 G56 X-4.2277 Y-1.4433 S2000 M3
G43 H4 Z2. T3 M8
G98 G83 Z-.5 R.1 Q.1 F10.
X-.6867
M5
G91 G28 Z0 M9
M1
N3(ROLL TAP)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T3 M06 ( 3/8-16 TAPRH)
G0 G90 G57 X-4.2277 Y-1.4433
G43 H3 Z2. T5 M8
M29 S200
G98 G84 Z-.5 R.1 F12.5 P100.
X-.6867
M5
G91 G28 Z0 M9
M1
N5(BRAND NEW TOOL NEEDED)
G91 G28 Z0
G0 G17 G40 G49 G80 G90
T5 M06 ( 3/8 FLAT ENDMILL)
G0 G90 G58 X-2.7157 Y-1.6796 S8000 M3
G43 H5 Z2. T1 M8
Z.2 G1 Z.1 F5.
G2 X-2.0673 Y-1.3026 Z.0383 I.3242 J.1885 F20.
X-2.7157 Y-1.6796 Z-.0235 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.0852 I.3242 J.1885
X-2.7157 Y-1.6796 Z-.147 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.2087 I.3242 J.1885
X-2.7157 Y-1.6796 Z-.2705 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.3322 I.3242 J.1885
X-2.7157 Y-1.6796 Z-.3939 I-.3242 J-.1885
X-2.0673 Y-1.3026 Z-.4557 I.3242 J.1885
X-2.4505 Y-1.8615 Z-.5 I-.3242 J-.1885
G1 X-2.4795 Y-2.0435
X-2.4585
G3 X-1.9905 Y-1.7673 I-.0105 J.5524
G1 X-2.9475
G2 X-3.0215 Y-1.4911 I.4785 J.2762
G1 X-1.9165
G3 X-1.9905 Y-1.2149 I-.5525 J0.
G1 X-2.9475
G2 X-2.4795 Y-.9387 I.4785 J-.2762
G1 X-2.4585
G0 Z.25 G0 G0 X-2.2815 Y-1.1161
Z.2 G1 Z-.5 F5.
G41 D5 X-2.6565 F20.
G3 X-3.0315 Y-1.4911 I0. J-.375
X-1.9065 I.5625 J0.
X-3.0315 I-.5625 J0.
X-2.6565 Y-1.8661 I.375 J0.
G1 G40 X-2.2815
G0 Z2. M5
G91 G28 Z0 M9
G28 Y0
M30
%