savtav
-
Posts
34 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by savtav
-
-
James,
Your Qoute is
I'd machine that sucker at full hardness too! Roughing it before heat treat is for wussies!
just a curious Qestion James. How to you tap a 5mm blind hole and drill 1mm holes at 66 rockwell without breaking the tap and drill
i know what i will be doing first.
-
Hi Mike,
Have you tried the post i sent you for your mazak?
Regards Sav
-
Were do i get one of this Magic Cutters ? can you supply some details for buying one .
Thanks
Regards Sav
-
Chad,
You can have a look in the cadcam's FTP, Under MC8 folder called Chev_badges.zip . These two badges are the real models i used to manufacture the tooling for the new chev trucks Last year , These cars should be on the road now .
Regards SAV
-
Hi All,
Does any one know when The finall Mcam v9.1 will
be released i know beta is still going.
Also is cnc bringing out any new v9 T-shirts?
i Have worn my V8 one out They are so cool every one responds to it, i even had a few job offers from oher toolrooms i vist. All they say to me is do you know how to use mastercam i say yes ,and all i get is when do you what to start
That really makes my Day...Mastercam rules
Regards Sav
-
Hi, Mike
I Will email you my posts that i have for mazak vqc which runs with mcam v9 no problem with that.
I had a look at one of the mazak manuals it's about 300 pages i will try to photo copy the manual and send it via mail. I will let you know. I also have a training book step by step were it shows you part exercises and setups for mazaks controlS were i first learned how to programme mazatrol that's only about 20 pages i think that will suit you and this time...
PS: I am located in Sydney Australia Down Under Did you hear what happened In Bali ? I think they are after the aussies now ...
Regards Sav
-
Hi Mike,
I currently use Mazaks VQC and AVJ cnc's
I can email my posts i have customised for these machines i use. No problem with that i also have manuals as hardcopys. i guess i can scan them for you but it will take me a while..
Regards Sav
- 1
-
Hi, ALL
Is Any one using the video card for mastercam v9
Quadro4 900 XGL ( 128 mg ) Thinking of upgrading any ideas?
-
When is Moldplus v9 comming out?
-
Hi Cadcam,
I had a look at your standingletters.mc9 file which you made for me but it was not what i was looking for , First of i need to use only v cutters lets say 20 deg d-bit with .20mm dia and it must go around each letter at a defined increment 0f .05mm step size each move is a 3d move in xyz so it can walk up the corner of the letter to give it a .1 rad in ther corner . The letters ar aproxx 3mm high, and on a convex curve
Thanks for your help
Regards Savtav
-
Hi Cadcam,
Thank for going out of your way to help me
From what i can see from gif file it looks like the letters are sharp ,but not very clear . Can you send the file to the ftp so i can take a closer look at it. I Had a rep from delcam come in today showing me Artcam pro v5.5 and it did what i wanted it to do but i would rather go with mastercam of cause.. Did you create the file using the ver9 engrave package adon ???? if so please explain...
Regards Savtav
[ 06-27-2002, 07:44 AM: Message edited by: savtav ]
-
Hi Cadcam, Did you get some time to look at my problem ??
One thing i don't know is how can i engrave letters on a convex or concave 3d curve and still sharpen the corners of the letters The letters have to be standing up like letter stamps. I have tried to project flat letters on to a surface curve but with no success. Any ideas......any one
[ 06-25-2002, 05:40 AM: Message edited by: savtav ]
-
Cadcam ,
I also use the the new engraving addon for v9 , It is a must for anyone you engraves alot . I do a lot of electrode and mold work and the best part about it is how it can pick out corners of letters giving it a sharp chisel look using v-cutters.
One thing i don't know is how can i engrave letters on a convex or concave 3d curve and still sharpen the corners of the letters ???
[ 06-23-2002, 06:34 AM: Message edited by: savtav ]
-
Has any one heard of, Or is using the quickrest chook . don't understand how to use it .. i can up it to the ftp for all to see if it makes clear to anyone.. Sorry but it is written in German i think ???
-
I reported this site about 3 months ago to the
BSA and Mcam about pirated software Sad to say
the site is still up and running???? Whats going on BSA.... Check it out for your self. I paid full price for my mastercam...
[ 02-23-2002, 02:00 AM: Message edited by: savtav ]
-
Ny Mike,
There was no price listed it was actually for free, There was even a direct link were you can Download it.
QUOTE:
-------------------------------------------------
If it is true & its already hacked
.That tell me that CNC Software has a leak in there programming department. A Serious Securty leak.!!!!!
Kenneth Potter , Mabe you are right lastweek Mastercams FTP site, had a door open with annominos login for V9 FINALL download very easy access for hackers to get to and crack..
I did check it out and it was true. And now it is closed with user and password is requried very strange.....!!!!!!
-
I Don't belive this Could be True??????
It just got released and hacked all ready I am still waiting for my legal copy .
-------------------------------------------------
CNC Software Mastercam v9.0
Chinese site again.
Thanks to them.
I hope is finall Mastercam v9.0
from info:
Team CADZ + + Associates
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄÄÄÄÄÄÛ P R E S E N T S ÛÄÄÄÄÄÄÄÄÄÄÄÄÄÄ/////
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ Mastercam V9.0 ³
³ © CNC Software Inc. ³
³ ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
/////ÄÄÄÄÄÄÄÄÄÄÄÄÛ ÛÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Supplier....: CADZ Team Release Date...: Feb 16, 2002 º
º Packager....: CADZ Team # of disks.....: 29 x 5.0 MB º
º Testers ....: CADZ Team º
º Cracker.....: L&TE Type ..........: CAD/CAM º
º Protection..: Dongle Platform.......: Win 98/NT/2000 º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
/////ÄÄÄÄÄÄÄÄÄÄÄÄÛ R e l e a s e N o t e s ÛÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º No matter what type of machining you do, Mastercam Version 9 offers º
º you something to boost your productivity. From 2D production work to º
º multi-axis machining, surface design to solid modeling and machining, º
º Mastercam Version 9 delivers a set of new tools for your shop. º
º º
º Mastercam Design Version 9 simplifies part design and helps ensure º
º that no matter where a CAD file is from, you can open and edit it º
º in Mastercam. All Mastercam Design enhancements are also included in º
º Mill, Lathe and Wire . º
º º
link in Attachment
regards
misko au
Attachment: mcam9.txt
This has been downloaded 53 time(s).
- 1
- 4
-
Hello Mcam Users,
I Make Car badges for a living and i happen to be working on a Chevy Bow tie mould. That you guys are talking about . These badges will circulate in a couple of months time . I will upload a zip in mc8 dir called chev_badges.zip to the FTP site. Please tell me what you think of my work..
Regards Sav
-
ProductDevelopmentGuy,
You Have mail. Hope you can do something
Regards Sav
-
Hi Mcam Users,
Can someone tell me what i should do if i came across a web site selling bootleg Mastercam and every other cadcam software there is.. I am very sorry to say but this web site is all ready selling Mcam beta2 for $79.00 ...
Who has the power to shut this site down, I will give the site address to who ever has the power to do something about it. I will not post it here... IT's not fair i paid full price for my Mastercam..... Please correct me if i am out of line for posting this here...
-
Any one Using The New Engrave chook.
Love the idea that Mastercam Engrave automatically creates crisp, tapering, angular edges.
I think the software was made from camaix ?
any ideas...on much the at adon for v8.11 is
my dealer is a bit slow getting back to me..
-
Well that's not really fair . I put in my request to become a beta- site tester over a month ago and i heard NOTHING from mastercam for access codes and cd
Thanks alot..
-
Can someone please confirm that Mastercam
has stoped the beta test site for v9 beta.
That is what my dealer told me, i have to wait for full release next year. Is that true......
-
Ok jay , I tried what you said and it did work, and that's what i wanted. But when the tool reaches the check surface the tool jumps up and down in z axis... how can i stop this action need to keep the tool down
please see the new file with the change i made EXECUTIVE-ELEC-2.zip
Climbmilling inSurfcace rough pocket
in Industrial Forum
Posted
when i use Surface rough pocket with a boundary is there a way i can control the cutter to
climb mill only with out turning on the finish parameter for a finish cut. The cutter chatters when a take a heavy cut in conventional cutting really what to rough the pocket out and the finish cut is a waste of time in this operation.
Regards sav