rroland
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by rroland
-
Great Thank You
-
Looking to change the tool change code line for tapping need to remove the S460 and M03 for the tap tool Current: ( 27/64 DRILL ) #7=#902 G00 G90 G54 X4.535 Y15.25 S4500 M03 G43 H#902 D#7 Z2. G98 G83 Z-1.25 R.1 Q.15 F20. Y.5 G80 G14 (TAP -2- HOLES) M6 T#903 T#901 M11 M10 ( 1/2-13 UNC ) #7=#903 G00 G90 G54 X4.535 Y15.25 S460 M03 G43 H#903 D#7 Z2. G95 M05 M135 S460 G98 G84 Z-.5 R.1 F.076923 Y.5 G80 G94 G14 M30 Need to be: ( 27/64 DRILL ) #7=#902 G00 G90 G54 X4.535 Y15.25 S4500 M03 G43 H#902 D#7 Z2. G98 G83 Z-1.25 R.1 Q.15 F20. Y.5 G80 G14 (TAP -2- HOLES) M6 T#903 T#901 M11 M10 ( 1/2-13 UNC ) #7=#903 G00 G90 G54 X4.535 Y15.25 G43 H#903 D#7 Z2. G95 M05 M135 S460 G98 G84 Z-.5 R.1 F.076923 Y.5 G80 G94 G14 M30 Thanks for your help
-
How can i get the CheckBox from ActiveReports Designer active when the setup sheet is created? Example: (___ would be the checkbox) Torque Wrench Settings ___ FT/LBS ___ IN/LBS