Lechu
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Lechu
-
-
Lead in @ out .1 tangent, ark .1 sweep 90 deg. works fine on fanuc post
-
Thanks Mark (Marek?)
Here is the code for 2" X 1" pocket 1/2 endmill
two cuts @ .25 depth, just rough.
line # 32,33 and 35,36 are the junk, not mater incrementall or absolute, 0 aproach not nead for machine to jump if You inside the pocket.
This is waiste of time and machine in small pockets.
This is the sample
O0001
(1/2 FLAT ENDMILL)
N1 G0G17G40G49G80G90
N2 T1M6
N3 G54X.0721Y.0693S2500M3
N4 G43H31Z.1M8
N5 G1Z.01F100.
N6 G3X-.0721Y-.0693Z-.0064I-.0721J-.0693F25.
N7 X.0721Y.0693Z-.0229I.0721J.0693
N8 X-.0721Y-.0693Z-.0394I-.0721J-.0693
N9 X.0721Y.0693Z-.0559I.0721J.0693
N10 X-.0721Y-.0693Z-.0723I-.0721J-.0693
N11 X.0721Y.0693Z-.0888I.0721J.0693
N12 X-.0721Y-.0693Z-.1053I-.0721J-.0693
N13 X.0721Y.0693Z-.1217I.0721J.0693
N14 X-.0721Y-.0693Z-.1382I-.0721J-.0693
N15 X.0721Y.0693Z-.1546I.0721J.0693
N16 X-.0721Y-.0693Z-.1711I-.0721J-.0693
N17 X.0721Y.0693Z-.1876I.0721J.0693
N18 X-.0721Y-.0693Z-.2041I-.0721J-.0693
N19 X.0721Y.0693Z-.2205I.0721J.0693
N20 X-.0721Y-.0693Z-.237I-.0721J-.0693
N21 X.0994Y.011Z-.25I.0721J.0693
N22 G1X.5625Y.0625
N23 X-.5625
N24 Y-.0625
N25 X.5625
N26 Y.0625
N27 X.75Y.25
N28 X-.75
N29 Y-.25
N30 X.75
N31 Y.25
N32 Z-.15F100.
N33 G0Z.1
N34 X.0721Y.0693
N35 Z-.15
N36 G1Z-.24
N37 G3X-.0721Y-.0693Z-.2564I-.0721J-.0693F25.
N38 X.0721Y.0693Z-.2729I.0721J.0693
N39 X-.0721Y-.0693Z-.2894I-.0721J-.0693
N40 X.0721Y.0693Z-.3059I.0721J.0693
N41 X-.0721Y-.0693Z-.3224I-.0721J-.0693
N42 X.0721Y.0693Z-.3388I.0721J.0693
N43 X-.0721Y-.0693Z-.3552I-.0721J-.0693
N44 X.0721Y.0693Z-.3717I.0721J.0693
N45 X-.0721Y-.0693Z-.3882I-.0721J-.0693
N46 X.0721Y.0693Z-.4046I.0721J.0693
N47 X-.0721Y-.0693Z-.4211I-.0721J-.0693
N48 X.0721Y.0693Z-.4376I.0721J.0693
N49 X-.0721Y-.0693Z-.454I-.0721J-.0693
N50 X.0721Y.0693Z-.4705I.0721J.0693
N51 X-.0721Y-.0693Z-.487I-.0721J-.0693
N52 X.0994Y.011Z-.5I.0721J.0693
N53 G1X.5625Y.0625
N54 X-.5625
N55 Y-.0625
N56 X.5625
N57 Y.0625
N58 X.75Y.25
N59 X-.75
N60 Y-.25
N61 X.75
N62 Y.25
N63 Z-.4F100.
N64 G0Z.1
N65 G91G28Z0
N66 M30
-
May somebody help me with cutting pocket tool jump up after avery depth of cut.
Try ramp helix and off not luck.
I want tool to stay on same z from last cut, then move X,Y, to next position for starting next depth of cut.
Maybe I Am doing something wrong, or missing some check boxes.
Keep tool down check box not helping.
Thanks!
-
May somebody help me with cutting pocket tool jump up after avery depth of cut.
Try ramp helix and off not luck.
I want tool to stay on same z from last cut, then move X,Y, to next position for starting next depth of cut.
Maybe I Am doing something wrong, or missing some check boxes.
Thanks!
-
When I use ramp cuts along radiuses or helix cut my posts output I0. J0. Or only R , no numeric values.
I try to use different machine def. force I J or R in different posts got G2 or G3 in line but no I,J or R at all when X Y Z stands together.
What I am doing wrong. May somebody have an idea?
Thanks. !
-
Is Verisurf free be term limit for use! My stop working with massage to get the latest update from verisurf?
May someone have idea. Thanks!
Pocket cuts optimization
in Industrial Forum
Posted
Crazy^Millman
The finish is off I just rough cut 1" by 2" pocket ½ dip 1/4 per pas depth tool jumps above part, or above last depth of cut.
Tthis is one of mastercam ups I think.
This is maybe ok in big pockets, but small You don't need tool to jump above last cut floor, just movement to next starting position for plunge, ramp, helix, etc. is ok.
Eliminate ton of garbage from program.
Thanks!