Crazy^Millman The finish is off I just rough cut 1" by 2" pocket ½ dip 1/4 per pas depth tool jumps above part, or above last depth of cut. Tthis is one of mastercam ups I think. This is maybe ok in big pockets, but small You don't need tool to jump above last cut floor, just movement to next starting position for plunge, ramp, helix, etc. is ok. Eliminate ton of garbage from program. Thanks!

Lead in @ out .1 tangent, ark .1 sweep 90 deg. works fine on fanuc post

Thanks Mark (Marek?) Here is the code for 2" X 1" pocket 1/2 endmill two cuts @ .25 depth, just rough. line # 32,33 and 35,36 are the junk, not mater incrementall or absolute, 0 aproach not nead for machine to jump if You inside the pocket. This is waiste of time and machine in small pockets. This is the sample O0001 (1/2 FLAT ENDMILL) N1 G0G17G40G49G80G90 N2 T1M6 N3 G54X.0721Y.0693S2500M3 N4 G43H31Z.1M8 N5 G1Z.01F100. N6 G3X-.0721Y-.0693Z-.0064I-.0721J-.0693F25. N7 X.0721Y.0693Z-.0229I.0721J.0693 N8 X-.0721Y-.0693Z-.0394I-.0721J-.0693 N9 X.0721Y.0693Z-.0559I.0721J.0693 N10 X-.0721Y-.0693Z-.0723I-.0721J-.0693 N11 X.0721Y.0693Z-.0888I.0721J.0693 N12 X-.0721Y-.0693Z-.1053I-.0721J-.0693 N13 X.0721Y.0693Z-.1217I.0721J.0693 N14 X-.0721Y-.0693Z-.1382I-.0721J-.0693 N15 X.0721Y.0693Z-.1546I.0721J.0693 N16 X-.0721Y-.0693Z-.1711I-.0721J-.0693 N17 X.0721Y.0693Z-.1876I.0721J.0693 N18 X-.0721Y-.0693Z-.2041I-.0721J-.0693 N19 X.0721Y.0693Z-.2205I.0721J.0693 N20 X-.0721Y-.0693Z-.237I-.0721J-.0693 N21 X.0994Y.011Z-.25I.0721J.0693 N22 G1X.5625Y.0625 N23 X-.5625 N24 Y-.0625 N25 X.5625 N26 Y.0625 N27 X.75Y.25 N28 X-.75 N29 Y-.25 N30 X.75 N31 Y.25 N32 Z-.15F100. N33 G0Z.1 N34 X.0721Y.0693 N35 Z-.15 N36 G1Z-.24 N37 G3X-.0721Y-.0693Z-.2564I-.0721J-.0693F25. N38 X.0721Y.0693Z-.2729I.0721J.0693 N39 X-.0721Y-.0693Z-.2894I-.0721J-.0693 N40 X.0721Y.0693Z-.3059I.0721J.0693 N41 X-.0721Y-.0693Z-.3224I-.0721J-.0693 N42 X.0721Y.0693Z-.3388I.0721J.0693 N43 X-.0721Y-.0693Z-.3552I-.0721J-.0693 N44 X.0721Y.0693Z-.3717I.0721J.0693 N45 X-.0721Y-.0693Z-.3882I-.0721J-.0693 N46 X.0721Y.0693Z-.4046I.0721J.0693 N47 X-.0721Y-.0693Z-.4211I-.0721J-.0693 N48 X.0721Y.0693Z-.4376I.0721J.0693 N49 X-.0721Y-.0693Z-.454I-.0721J-.0693 N50 X.0721Y.0693Z-.4705I.0721J.0693 N51 X-.0721Y-.0693Z-.487I-.0721J-.0693 N52 X.0994Y.011Z-.5I.0721J.0693 N53 G1X.5625Y.0625 N54 X-.5625 N55 Y-.0625 N56 X.5625 N57 Y.0625 N58 X.75Y.25 N59 X-.75 N60 Y-.25 N61 X.75 N62 Y.25 N63 Z-.4F100. N64 G0Z.1 N65 G91G28Z0 N66 M30

May somebody help me with cutting pocket tool jump up after avery depth of cut. Try ramp helix and off not luck. I want tool to stay on same z from last cut, then move X,Y, to next position for starting next depth of cut. Maybe I Am doing something wrong, or missing some check boxes. Keep tool down check box not helping. Thanks!

May somebody help me with cutting pocket tool jump up after avery depth of cut. Try ramp helix and off not luck. I want tool to stay on same z from last cut, then move X,Y, to next position for starting next depth of cut. Maybe I Am doing something wrong, or missing some check boxes. Thanks!

When I use ramp cuts along radiuses or helix cut my posts output I0. J0. Or only R , no numeric values. I try to use different machine def. force I J or R in different posts got G2 or G3 in line but no I,J or R at all when X Y Z stands together. What I am doing wrong. May somebody have an idea? Thanks. !

Is Verisurf free be term limit for use! My stop working with massage to get the latest update from verisurf? May someone have idea. Thanks!