We also have a G90 G10 P16 R0.000 at the beginning to control size if needed, How do you guys leave say .0005 in the hole if you wanted to? If the cad is not perfect do you redraw it? And do you enter a Z value for the head height? here is our old post % O0000 G90 G10 P16 R0.000 ( 2 INCH CIRCLE OLD POST ) G11 (TEC,1) N5 G11 (WIR,LS25) M15 P1 M31 N10 G0 G20 G90 N15 G0 X0. Y0. N20 G75 X0. Y0. N25 G0 Z5. N30 G0 X0. Y0. N35 G92 X0. Y0. I1. J0. N40 G92 N45 M60 N50 M28 N55 M24 N60 S501 N65 G41 G1 X1. N70 G3 X-1. I-1. N75 X1. I1. N80 G40 G1 X0. N85 G0 X0. Y0. N90 X0. Y0. N95 S502 N100 G42 G1 X1. N105 G2 X-1. I-1. N110 X1. I1. N115 G40 G1 X0. N120 G0 X0. Y0. N125 X0. Y0. N130 S503 N135 G41 G1 X1. N140 G3 X-1. I-1. N145 X1. I1. N150 G40 G1 X0. N155 G0 X0. Y0. N160 X0. Y0. N165 S504 N170 G42 G1 X1. N175 G2 X-1. I-1. N180 X1. I1. N185 G40 G1 X0. N190 M50 N195 G90 G10 P16 R0.000 M35 M30 %

Thanks for the input, our old post has a G75 X0.00 Y0.00 before the G92 X0 Y0 so it moves to zero before it starts, I dont see that in your programs do you just make sure you are at zero when you hit go?

Hello, we have X5 and are running two charmilles wires 440 and 390 with millenium control, we recieved a new post and it is WAY different than ou previous one, I need a post or example program from someone so I can see what is or is not nesasary, in the output code. This is the program for a 2 inch circle 4 cuts from the new post. Appreciate all help. New Post % O0001 N100 G90 N110 G92 X0. Y0. N120 G11 ( TEC, 1 ) N130 M15 P0 N140 S501 N150 M60 N160 G92 G0 X0. Y0. I1. J0. H0 N170 G41 D1 G1 X1. N180 G3 X-1. I-1. J0. N190 X1. I1. J0. N200 G40 G1 X0. N210 M15 P0 N220 S502 N230 G92 X0. Y0. I1. J0. H0 N240 G42 D2 G1 X1. N250 G2 X-1. I-1. J0. N260 X1. I1. J0. N270 G40 G1 X0. N280 M15 P0 N290 S503 N300 G92 X0. Y0. I1. J0. H0 N310 G41 D3 G1 X1. N320 G3 X-1. I-1. J0. N330 X1. I1. J0. N340 G40 G1 X0. N350 M15 P0 N360 S504 N370 G92 X0. Y0. I1. J0. H0 N380 G42 D4 G1 X1. N390 G2 X-1. I-1. J0. N400 X1. I1. J0. N410 G40 G1 X0. N420 M50 N430 M30 %

I would like to know if anyone has moved all the user files to the shared\all user location, making all mastercam files in the all user location. What i a trying to achieve is no matter who is logged in everyone gets the same setup without making config, mtb, etc... for everyone, and then if it needs changed it can be changed one time. Thanks