PODDNO
-
Posts
9 -
Joined
-
Last visited
PODDNO's Achievements
Newbie (1/14)
0
Reputation
-
I progam for an ezpath flat bed, I still use left upper, the post is what changes the rotation and x axis
-
using a G30 U0 V0 H0 M205 SEEM LIKE THE Y AXIS IS GOING TO HOME.
-
have not been in touch with dealer, have talked to mazak and sent them a copy of my program have not heard anything from them. but our network has been done.
-
I believe inhouse is the name of the supplier of our post.
-
threading boring bar
PODDNO replied to Rocketmachinist's topic in Machining, Tools, Cutting & Probing
KENNAMETAL HEAVY METAL BAR L08RNER2 IS A .5 BAR R/H .730 MIN DIA. INSERT NT2L 7-20 TPI IN THE 5025 GRADE WORKS WELL -
AT THE END OF THE MILLIING CYLCE IT HAS G30 U0. V0. H0. M205 AND AT THE START OF TURN CYCLE IT HAS G53.1 T1212 G18 G99 M202 G97 S1000 M3 R1 ONLY TIME I HAVE THIS PROBLEM IS IF I DO TURNING AFTER MILLING, IF I CAN DO ALL THE MILLING AT THE END OF PROGRAM AND READS THE M30 WORKS FINE.
-
GOT A MAZAK 250 WITH Y AXIS, PROGRAMING WITH X6 WHEN I USE LIVE TOOLING AND GO TO TURNING AGAIN IT SEEM LIKE ITS KEEPING TO LIVE TOOL OFFSET. CAN RESET AND REMODLE RESTART WORKS FINE. DON'T KNOW IF POST IS LEAVING SOMETHING OUT OR MACHINE PROBLEMS.
-
I'll try it, thanks
-
I'M CUTTING A HEX WITH SIDE OF THE ENDMILL, GETTING SCOLLUPS ON THE FLATS. PROGRAMED WITH X6. ANYONE KNOW WHAT I SHOULD DO TO GET A SMOOTH SURFACE?