alfagt
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by alfagt
-
It is a second time I am trying to bore a drilled hole to size with different size, for ex. 0.5 inch leght to 1.25 and the rest of it to 1 inch to 0.5 dimeter. The problem is that the adjustment that I make will produce to different out of tolerances specially on the smaller one. Any sugesstion?
-
Sorry, I had difficulty to load the part. I am using MCX5. I did find to load the part as solid and despite the Milling that you can create stock from solid, i Lathe you have to choose Solid in the setup and after that it gives you possibility to use solid functions of the tool path to select. Anyway thank you for help. Regards,
-
I have file there, but I do not know what did happen to it. I do not know how I can upload the file again
-
I have this part made with Soliworks. When I upload it with MasterCAM and try to creat a turining profile it fails. Anybody know what to do?
-
I wonder if anybody knows in the tool selection in mastercam mill what are the height and diameter offest indicate? Is this the same as contol pane in the CNC or something else?
-
I wonder how on the mastercam Lathe toolpath define a thread on the taper?
-
thank you brendon. When I calculate manually yhte treading toolpath and writ a program I use a G76 code. for example: G76P110060Q0100R0.0005 in the P function the 60 stnads for 60DEG angle of the toll and thread profile. It is stange that when I did the semin mastercam and post the codes it appears as 29 instead 60 and that conceren me. I am agree with you regarding leadin angle.
-
If you write a threading tool path, internal or External, there are 3 tabs in mastercam; defining tool, shape of threads and cut parameteres. In the cutting prameteres there is a leadin angle which when you post G code it appears in the G76 line where in manual programming is the profile angle between to threads. The 60 Degree angle which in required for the UNC and UNF threads. I wonder if this value has to be put there or this lead in angle is just an approch to the the threads? I am a little confuse. Anybody has an answer?
