no dealer,

hi no dealer here, can you help me?

Hi Please look at attached picture , Mastercam use the method that showed in the right but i need to use the other method that showed in the left on attached picture because i need threading of a squared profile so i need to use the method that showed in the right of attached picture. please let me to know how can i switch to this type of movement in Mastercam CNC lathe machining? Thank you

Hi Can you please help me to know how can i Machining of STL file? Thank you

Hi Please look at attached picture and let me know can i threading of this pattern with Mastercam on a CNC lathe machine? I am wait for your reply. Thank you

Hi Can some one help me to know how can i create a special insert style in Mastercam turning tools? Thank you

Hi I need threading on a path , Please see attached picture it is a single point thread in a taper and straight path I have a CNC lathe machine (Sinumerik 810) Please help me Thank you

Hey there I am looking to know more about programmming Tornos swiss lathe machine. Does Mastercam can do that? Do you kow any other way? I am looking for your reply. Thanks

Hey there Can someone suggest me what surface finish strategy is good for attached part? 1- Rough : pocket (attached picture) 2- Rest mill 3- Finish : countor for wall 4- Fnish : Parallel 5- Finish for head of bottle OR 1- Rough : pocket (attached picture) 2- Rest mill 3- Finish : Scallope 4- Finish for head of bottle I am wait for your reply. Thank you

Hi Everyone Please look at below video. http://videobam.com/eIEYm i get a machining for this part by finish surface hybrid. I don't know very the mastercam change the machining direction during the machining. from 0 to 39 second of video it is conventional from 39 to 1.06 second it is climb and from 1.06 to end it is convetiobnal. Pleaselet me to know why? Thank you

Thank you so much Dear Cathedral

Hi cathedral Thank you for your reply, but how can i do it with point toolpath? does you mean about the drilling ? if yes it is in Z axis but i need in X & Y If no , please let m,e to know more about the point toolpath. Thank you

Hi I am new in change post processing of mastercam. I have new idea for a machine and i need to control it by the matsrecam software but i don't have enough information that does it possible to program it by mastercam or not. I need to the machine move on X axis from position 1(on x axis) to position 2(on x axis) with G1 code and at the end of position 2(on x axis) come back to the position 1(on x axis) with GO and then go to the next position, this additional movement occur on X and Y axis movement. Does it possible for mastercam post prosses? for example : G91 G01 X100 F2000; G0 X-100 F3000; G01 Y200 F2000; G0 Y-200 ; . . . I am wait for your reply. Thank you