-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Stan Marsh
-
-
hi
no dealer here, can you help me?
-
Hi
Please look at attached picture , Mastercam use the method that showed in the right but i need to use the other method that showed in the left on attached picture because i need threading of a squared profile so i need to use the method that showed in the right of attached picture.
please let me to know how can i switch to this type of movement in Mastercam CNC lathe machining?
Thank you
-
Hi
Can you please help me to know how can i Machining of STL file?
Thank you
-
-
Hi
Can some one help me to know how can i create a special insert style in Mastercam turning tools?
Thank you
-
-
Hey there
I am looking to know more about programmming Tornos swiss lathe machine.
Does Mastercam can do that?
Do you kow any other way?
I am looking for your reply.
Thanks
-
Hey there
Can someone suggest me what surface finish strategy is good for attached part?
1- Rough : pocket (attached picture)
2- Rest mill
3- Finish : countor for wall
4- Fnish : Parallel
5- Finish for head of bottle
OR
1- Rough : pocket (attached picture)
2- Rest mill
3- Finish : Scallope
4- Finish for head of bottle
I am wait for your reply.
Thank you
-
Hi Everyone
Please look at below video.
i get a machining for this part by finish surface hybrid.
I don't know very the mastercam change the machining direction during the machining.
from 0 to 39 second of video it is conventional
from 39 to 1.06 second it is climb
and from 1.06 to end it is convetiobnal.
Pleaselet me to know why?
Thank you
-
Thank you so much Dear Cathedral
-
Hi cathedral
Thank you for your reply, but how can i do it with point toolpath? does you mean about the drilling ? if yes it is in Z axis but i need in X & Y
If no , please let m,e to know more about the point toolpath.
Thank you
-
Hi
I am new in change post processing of mastercam. I have new idea for a machine and i need to control it by the matsrecam software but i don't have enough information that does it possible to program it by mastercam or not.
I need to the machine move on X axis from position 1(on x axis) to position 2(on x axis) with G1 code and at the end of position 2(on x axis) come back to the position 1(on x axis) with GO and then go to the next position, this additional movement occur on X and Y axis movement.
Does it possible for mastercam post prosses?
for example :
G91 G01 X100 F2000;
G0 X-100 F3000;
G01 Y200 F2000;
G0 Y-200 ;
.
.
.
I am wait for your reply.
Thank you
STL File
in Industrial Forum
Posted
no dealer,