Robby GM
-
Posts
79 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Robby GM
-
-
Scott . i like your invert-a-bolt.
i can think of great uses for it.
thanks for the tip
-
Your working ,,,3:40 AM
-
Thank You Roger
that did it.
-
ill try it at work weds and let u know
thanks all
-
controls are cincinnati 850sx
post is Mpmaster post
-
subsequent peck dialog box is grayed out
post has peck1 only in it
-
we use long ouput for our drill operations
just noticed not getting same amount of peck
in nc file that we put in peck amount box
input 5 mm and nc has 2mm picks
tryed changing pick %dia, no change
we do not use materal list...
any ideas as to were to look next..
ps: ver 8.1.1 and using MPmaster post
[ 12-03-2002, 10:44 AM: Message edited by: Robby GM ]
-
Happy Thanksgiving and
Go Lions... & Wings.....I hope !!!
-
Cool gif Jay
-
wow must be wild milling and whole ship moving
-
Hi Tri-Tech 5-axis
When we finish large 3d surfces our finish cuts
are with a 30 mm ball end mill with .4 mm stepovers, yes you can see cutter lines in the surfaces but are too small to be a problem.
.001 mm's scollops on flat
.003 mm's scallops on 45
-
James is right. some machines just work better then other doing large 3d surface work
plus sometimes cnc controlers have acc/dec built into , i turn off all acc/dec.
with it on leaves a mark at end of each block of code
-
line between to points on a surface is control
under MC config tolerances /
Maximum surface deviation
i use a setting of .0002 mm
-
In auto die work there are 2 types
of sheet metal parts.
Black metal = parts not seen by the eye
( supports, inner hoods etc )
Class A surface = are parts you see
outer hood, outer door etc
Class A surface refer's tpo sheet metal part
not surface finish of die it self
Robby GM
Metal Fab ,GM
[ 10-08-2002, 01:38 PM: Message edited by: Robby GM ]
-
ive had parts come out that you could see in the part the different surface patchs, but they are too small to effect ( in the .0000,s)
smaller cut tol helps
-
I must admit, we have our door interlocks disabled too, on our sabres, 2 other machines too big for doors, But i would find other ways to save time then leave spindle running.
all it takes is one slip...
-
i used all my old 5 1/4 floppys as bow
targets..
-
*************************************************
Verisurf is the CMM Inspection software for Mastercam, we can interface to all manual CMMs and measure parts within Mastercam.
*************************************************
Hi Tri-Tech
who about with a very OLD cordax..
-
i have 2 daughters
21 and 27
27 year old just had to move back home
for a will
with 2 girls ,wife and a female dog i think
im going maddddd
forum members with young kids is making
me feel very old now
-
Proper planning
Prevents xxxx poor performance
-
Wings Win!
-
150 ipm is all our big machines can handle on
a finish path. Boss's think its wild at that speed.
they are happy ,
-
we use a pc's to drip feed our machines
we auto parts, only problem we've had when
feeds get over 150 ipm.
biggest programe ive rum was 12mb, hood die
start up and go to lunch,dinner and a nap
-
great one
ROFLOL
O/T New addition to the family
in Industrial Forum
Posted
Congratulations