Do you have a specific date in mind for the update? We would like to move forward with SolidWorks 2010 but we cannot until MasterCAM can import the files. Thanks

Good Morning Does anybody have a power library for a Fanuc Alpha OC they would be willing to share? We recently migrated from different software to MasterCAM Wire. Any help would be appreciated. Thanks

How can I output the value of a Variable so I know what it is holding in certain places of a post? I am trying to do some debugging. Also, what is the proper format of an if, then statement in a post. Thanks

I am having no luck getting this to work. Any suggestions? Thanks

You are correct! I would like it at theend of last operation of every tool. Thanks

I am trying to have my post output a certain line of code (G65P9863H.01) when it is any tool number EXCEPT T30. Anybody have any suggestions. Thanks in advance

You are correct, I want the toolbar button to read the csv file and move all surfaces to level 2. Thanks

We have exported are levels as a csv file and I would like to import the csv file so everybody uses the same levels. Hope that makes sense.

How about importing our levels?

I need to make a simple c-hook, macro or VbScript program. What I need it to do is import our level csv file, then put all surfaces onto level 2. Can anybody provide me a sample file that I can modify to get the desired results? Thanks

It is not the latest and greatest, but it was for X Copied from the 1st line of the post: [post_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V10.00 E1 P0 T1129845119 M10.00 I0 Thanks

By the way, we started with MPMaster Chris

There are other misc intergers in the post that do not work also. mi2 mi9 mi10 Is there something we need to turn on to get these to work? Thanks Chris Tellers

Do I need to change all of the mi3 to mi3$ or just certain ones? Thanks Chris Tellers

I am having some trouble getting my misc integers to work. Basically I want it to execute some certain code when I have a '1' in the Misc Integer 3. Unfortunately it always puts the line into the G code. I am no sure what I need to do to get it to work. I have attached the code from my post and the output I get when I run it. Here is my coed in the post code: ptlbrk #Toll Breakage Detection if mi3 = 1, pbld, n, "G65", "P9863", "H.010", "Z3.0", "(TOOL BREAKAGE DETECTION)", e$ if mi3 <> 1, "OOPS! - mi3 is NOT equal to 1", e$ prv_mi3 = mi3 !mi3 Here is what it outputs G65P9863H.010Z3.0(TOOL BREAKAGE DETECTION) OOPS! - mi3 is NOT equal to 1 Thanks for any help Chris Tellers