G95 wins!!!!! MUCH appreciation guys!

I have to add to this: It actually IS repeating, but the feedrate is so slow it is imperceptable other than watching the position readout slowly tick down! What changed my feedrate?

I have an odd problem. I have written and run a program on my Okuma LNC-8 successfully hundreds of times. Trying to assign a "GOTO" command at the end results in the program repeating up to the first G01 line. X and Z motion stops. The spindle does not stop. In the program below it stops at line N0008. Thanks in advance $B4C.NC% N0000 (B4C.NC) N0001 (MON. 11/18/2013 03:30PM) V9=V9+1 N0003 G00 X10. Z.5 N0004 G50 S1000 N0005 G96 S500 M41 M03 M08 N0006 G00 X.6222 Z.1 T080808 N0007 G00 Z-.06 N0008 G01 X-.06 F.015 N0009 G01 X.02 Z-.05 N0016 G00 X.822 Z-.05 N0017 G00 X.242 N0018 G01 Z-.071 F.015 N0019 G03 X.2627 Z-.0917 I-.0549 K-.0404 N0020 G03 X.2662 Z-.1154 I-.0938 K-.019 N0021 G01 X.2664 Z-.2987 N0022 G01 X.4048 Z-.2989 N0023 G03 X.4445 Z-.3087 I-.0018 K-.0285 N0024 G03 X.4545 Z-.3205 I-.0196 K-.0152 N0025 G03 X.456 Z-.3627 I-.3361 K-.0272 N0026 G01 X.5398 Z-.3633 N0027 G01 X.5639 Z-.3657 N0028 G01 X.5926 Z-.3725 N0029 G03 X.642 Z-.4105 I-.0347 K-.0496 N0030 G00 Z-.05 N0031 G00 X.1585 N0032 G03 X.242 Z-.071 I-.003 K-.0578 N0039 G00 X.822 Z-.06 N0040 G00 X.1573 N0041 G03 X.2314 Z-.0813 I-.0023 K-.047 F.015 N0042 G03 X.2461 Z-.1086 I-.0397 K-.0253 N0043 G01 X.2464 Z-.3087 N0044 G01 X.4045 Z-.3092 N0045 G03 X.4304 Z-.3158 I-.0001 K-.0162 N0046 G01 X.4352 Z-.3222 N0047 G01 X.436 Z-.3727 N0048 G01 X.5278 Z-.3729 N0049 G01 X.551 Z-.3743 N0050 G01 X.5707 Z-.3779 N0051 G03 X.622 Z-.4124 I-.0218 K-.043 N0052 G00 X10. N0053 G00 Z0. N0054 T0800 N0055 G96 S500 M09 N0056 N0057 G96 S500 M41 M03 M08 N0058 G00 X.6535 Z-.5057 T101010 N0059 G01 X.5424 F.007 N0060 G00 X.6535 N0061 G00 X11. N0062 G00 Z.5 N0063 T1000 N0064 G96 S500 M09 N0065 N0066 G96 S500 M41 M03 M08 N0067 G00 X.822 Z-.685 T121212 N0068 G01 X0. F.007 N0072 G96 S500 M09 N0073 M01 N0074 M05 G94 Z-.5 F200. G00 X-2.55 M84 G04 P1 G94 Z.135 F100 M83 N0075 G00 X10. N0076 G00 Z1. N0077 T1200 N0078 GOTO N0001 N0091 M02