Cbgstyles
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Cbgstyles
-
multiaxis morph tool path lead in lead out help!!!!
Cbgstyles replied to Cbgstyles's topic in Educational Forum
I got it !!! Thank you everybody for your help!!!! -
multiaxis morph tool path lead in lead out help!!!!
Cbgstyles replied to Cbgstyles's topic in Educational Forum
ok that looks good but what happens when you give it a .01" finish pass ? that's where I seem to be having all the trouble -
I have a multi axis morph tool path , I have a roughing depth of cut and a finish depth of cut. I cant get a lead in and a lead out on both depth of cuts ???????????
-
I have a multi axis morph tool path , I have a roughing depth of cut and a finish depth of cut. I cant get a lead in and a lead out on both depth of cuts ??????????? morph.mcam
-
does anybody know if its possible to use my own custom macros in the productivity plus probing , in Mastercam 2017?
-
Im trying to make a simple custom drill cycle any tips? in general I can maneuver in Mastercam pretty well just don't know the process
-
hi any body know how to set up axis limits , when I run a tool path it will error , I've tried setting machine definition and it does nothing
-
thanks for all the great advice , is there any way possible to get a copy of the the program that you guys had success with , maybe I could look at it and see where im going wrong ??
-
how do you know what to adjust ? guessing?
-
thanks guys , ron what postions are you picking for the translation in XYZ postions?
-
its transforming it into correct orientation but I cannot get it in the correct position?
-
I cant get in postion in the 2017 version either , I cant believe there isn't a way to get it in postion other then in top New Compressed (zipped) Folder.zip
-
I can make the machine sim orient correctly if my wcs are made from the same plane as the top , but if I create a new plane and wcs by rotating it , I cannot get my fixtures and oriented onto the machine in the sim? SAMPLE 2.MCX-6
-
hi wondering if there is any way to set the axis travel limits , so there is some type of warning ? I set the travel limits in the machine definition for X and Y , and then created a tool path that went past those set, and there was nothing ? the only one I know of is in machine simulation ?
-
I cant it wont let me change axis combinations ? even though I have all the axis combinations set in the machine definition correctly, I don't know if its just the demo version or what?
-
Hi Ron thanks for the help, I'm using the demo 2017 version here's my program , hopefully you can tell me what I'm doing wrong New Compressed (zipped) Folder.zip
-
I'm using Mastercam 2017
-
Hi I have a problem with a mill-turn program I'm doing , hoping someone can help me ? I completed all ops on left chuck , then did a stock transfer , then went to do a simple facing op on the right chuck , and I get a error saying (this tool is programmed to cut stock in left spindle )? I know what it means but I don't have a option to choose the right spindle in the parameters (axis combination/ spindle origin ) page ? I should be able to pick the right spindle ? but only the left chuck is highlighted