I'm using 2 monitors; one uses 1920x1080, and the other 1600x900. This wasn't a problem with X8. I'm guess re-install X9 at this point since nothing seems to cure it so far.

I've been running X9 Beta for a couple months, and just installed the latest release of X9. It's mostly been going really well, but I'm experiencing an issue I've never had before. When I edit a tool, from the Operations Manager, the Tool Manager dialog boxes are fragmented and you can see only some of them. Click on "Next" or "Back" button, and it will repaint ok, but if you open another window or something it disappears again. Tool Manager opened as stand alone appears to work just fine, so this is just related to opening it from within Mastercam. Our Mastercam dealer suggested upgrading the graphics board, so just installed a NVidia Quadro K2200. The graphics problem still persists. I'm running Windows 7 Professional 64bit system with an i7 CPU and 8gb of RAM. I've also experimented with the NVidia control panel settings, and set it to use X9 settings, to same effect. Anyone else experiencing this, or have a solution? Thanks! Steve