Hi that is not in my fanuc post or i can't find it, this post is for  6t older lathe. So i still need some help.

Thanks i will give that a try!!!

Hi how would i go about getting my post to put M42 on its own line/block in my post? This is how it outputs now all on one line G97 S498 M03 M42  My mori says you can't have two M codes on the same line.

Thanks for any input!

Hi i did switch G2 and G3 around  and i am using I & K  so i will have to figure that out yet!!

Hi i changed dia_mult     : -2     #Multiplier for output on X axis (Neg. switches sign of X) and it posts - X now!!!

Do i have to switch G2 cw and G3 ccw to?

you will also need to reverse G2/3 and the sign for "I" on arc moves.

I know this is a old thread but how is this done? Do i just  change the CW  with CCW or something else?

 I just bought a old mori sl4 and it has X axis reversed compared to newer lathes. Plus what is posted above.