Well Doosan finally got back to me after 2 days and I was able to sort it out. This fixed it for me (TOOL - 8 OFFSET - (12X1.75 TAP) T808 G0 G54 G99 X0. Z.1 G97 S85 M29 G84 Z-1.25 F.0689 G80 G00 X9. Z5. M05 T800 M30 %

This is the tap G-code I came up with after doing some research. The cycle works but the RPM goes to around 680 instead of staying at 85 and I am not sure why. Can anyone tell me if there is an issue with the code? The machine is a Daewoo Lynx 210C Lathe Controller is Fanuc Oi-T Tap_Sample2.NC

I couldn't find *ptap* when i search the post. I did find *ltap* but I didn't see where to change it for G84. I will just have to wait for my reseller to get back to me on the post. I was just going to check here just in case it was something simple I was overlooking. Thanks for the help

when it post the program its does so as G32 I guess I could just manual edit after it post it but I was going to see if there is some way to have it post correctly the first time.

Hi I have Mastercam 2018 at work and I was trying to program a tap cycle on a lathe but the only option for it on the list is G32 and I am used to working with G84. Can anyone tell me if there is a difference between G32 and G84? The lathe is a Daewoo Lynx 210C Controller is Fanuc Oi-T My tap is on mounted with a spring loaded tapping head. I am using the Default post for lathes on Mastercam and I have tried several other posts but I haven't seen the option of the Tap G84 in the Cycle list. Thanks.